DTC P0107, P0108 5.19 - harley-davidson-sweden.se
DTC P0107, P0108 5.19 - harley-davidson-sweden.se
DTC P0107, P0108 5.19 - harley-davidson-sweden.se
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
HOME<br />
Test 5.29 (Part 2 of 2)<br />
IGNITION COIL: <strong>DTC</strong> P1351, P1352, P1354, P1355<br />
Continued from Test 5.29 (Part 1 of 2).<br />
Using Breakout Box, measure resistance between<br />
ECM and coil terminals as follows.<br />
<strong>DTC</strong><br />
COIL<br />
TERMINAL<br />
BREAK-<br />
OUT BOX<br />
TERMINAL<br />
P1351/<br />
P1352<br />
D<br />
(BE/O wire)<br />
29<br />
1<br />
P1353/<br />
P1354<br />
C<br />
(Y/BE wire)<br />
11<br />
3<br />
Resistance less than 0.5 ohms<br />
YES<br />
NO<br />
Perform 5.8 WIGGLE TEST<br />
to check for intermittents.<br />
Intermittents pre<strong>se</strong>nt<br />
Repair open wire<br />
or connection.<br />
YES<br />
NO<br />
Repair<br />
intermittent.<br />
Check for continuity to ground.<br />
Front coil codes: Check<br />
Breakout Box terminal 29.<br />
Rear coil codes: Check<br />
Breakout Box terminal 11.<br />
Continuity pre<strong>se</strong>nt<br />
YES<br />
NO<br />
Repair short<br />
to ground.<br />
Check for voltage.<br />
Front coil codes: Check<br />
Breakout Box terminal 29.<br />
Rear coil codes: Check<br />
Breakout Box terminal 11.<br />
Voltage pre<strong>se</strong>nt<br />
YES<br />
Repair short<br />
to voltage.<br />
NO<br />
Replace ECM.<br />
Reprogram and<br />
learn password.<br />
Clear codes using speedometer <strong>se</strong>lf diagnostics.<br />
See 5.6 SPEEDOMETER SELF DIAGNOSTICS.<br />
Confirm proper operation with no check engine<br />
lamp.<br />
5-112 2004 Touring: Engine Management (EFI)