flasher stm8.pdf - SEGGER Microcontroller

More documents

Recommendations

Info

56 CHAPTER 5 Remote control #ERRxxx If any command other than #STATUS or #RESULT was terminated with an error, Flasher cancels the command and replies with an error message instead of #OK message. Some error codes may be followed by colon and an additional error text. For example: #ERR007:CANCELED. The error code numbers are described in the following table: Message Description Flasher received #CANCEL command #ERR007 and has canceled the current operation. Undefined error occurred. This reply #ERR255 is followed by an error string. Table 5.3: List of error code numbers which are currently defined Flasher STM8 (UM05006) © 2011 SEGGER Microcontroller GmbH & Co. KG
Chapter 6 Hardware This chapter gives an overview about Flasher STM8 specific hardware details, such as the pinouts and available adapters. Flasher STM8 (UM05006) © 2011 SEGGER Microcontroller GmbH & Co. KG 57
Page 1 and 2:
Flasher STM8 User guide of the stan
Page 3 and 4:
Revisions This manual describes the
Page 5 and 6: About this document This document d
Page 7 and 8: 7 Table of Contents 1 Introduction
Page 9 and 10: Chapter 1 Introduction This chapter
Page 11 and 12: 1.2 Specifications 1.2.1 Specificat
Page 13 and 14: 1.4 Supported CPU cores Flasher STM
Page 15 and 16: Chapter 2 Setup This chapter descri
Page 17 and 18: 2. Accept the default installation
Page 19 and 20: 2.2 Setting up the USB interface Af
Page 21 and 22: 2.3 Uninstalling the J-Link USB dri
Page 23 and 24: 2.4.1.2 Connecting via Ethernet onl
Page 25 and 26: 2.4.2.2 Configuring Flasher via web
Page 27 and 28: Chapter 3 Flasher STM8 related soft
Page 29 and 30: 3.2 Flasher STM8 software and docum
Page 31 and 32: 3.3 Using the JLinkSTM8.dll 3.3.1 W
Page 33 and 34: Chapter 4 Working with Flasher STM8
Page 35 and 36: 4.1.1.2 Setting up Flasher STM8 for
Page 37 and 38: After the download, you should see
Page 39 and 40: 4.2 Multiple File Support It is als
Page 41 and 42: 2. Use "File->Save programmer confi
Page 43 and 44: 9. Download the files from your tem
Page 45 and 46: 4.3.2 Configuring multiple Flasher
Page 47 and 48: Chapter 5 Remote control This chapt
Page 49 and 50: 5.2 Handshake control Flasher STM8
Page 51 and 52: #AUTO NOINFO This command may be us
Page 53 and 54: #FDELETE flasher.dat #ACK #OK Note:
Page 55: Message Description #STATUS:ERASING
Page 59 and 60: 6.2 4-pin Connector Flasher STM8 ha
Page 61 and 62: 6.4 Target board design for SWIM We
Page 63 and 64: Chapter 7 Background information Th
Page 65 and 66: Chapter 8 Support and FAQs This cha
Page 67 and 68: 8.2 Frequently Asked Questions Maxi
Page 69 and 70: Chapter 9 Glossary This chapter des
Page 71 and 72: Chapter 10 Literature and reference
Page 73 and 74: B Big-endian ......................
show all

flasher stm8.pdf - SEGGER Microcontroller

Create successful ePaper yourself

Delete template?

Save as template?