Prestige 964 Cable Router Operator's Guide - bei GGA Maur

Prestige 964 Cable Router
4 multicast packets sent
0 input errors; 0 output errors
0 collisions; 0 dropped
6.5.7 monitor
This command shows system status per 3 seconds for diagnostic use. Enter “exit” command to exit the monitor. If users do not exit it,
the screen will be repeatedly displayed for about 30 minutes. Then it will automatically stop. The following is the sample screen:
Example:
monitor
6.5.8 exit
This command stops displaying system status screen.
Example:
exit
6.5.9 fac_reset [true|false]
This command to enable/disable the reset factory default feature.
Example:
fac_reset true
6-8 Command Sets