SMA 3300/3800 Manual - All Eco Energy
SMA 3300/3800 Manual - All Eco Energy
SMA 3300/3800 Manual - All Eco Energy
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>SMA</strong> Solar Technology AG<br />
Electrical Connection<br />
5.5.2 Assembling the DC Plug Connectors<br />
The connection cables of the PV modules must be equipped with the DC plug connectors provided for<br />
connecting the inverter.<br />
To assemble the DC plug connectors, proceed as follows: Make sure the plug connectors have the<br />
correct polarity. The DC plug connectors have the symbols "+" and " − ".<br />
Cable Requirements<br />
• Use a PV1-F cable.<br />
Procedure<br />
1. Insert the stripped cable into the plug connector as<br />
far as it will go.<br />
2. Press the clamping bracket down until it audibly<br />
snaps into place.<br />
3. Ensure the cable is correctly in place.<br />
Result<br />
☑ If the conductor is visible in the hollow<br />
cavity of the clamp, the cable is in the<br />
correct position.<br />
Action<br />
• Proceed to step 4.<br />
Installation Guide SB33_38-IEN100540 29
Change language