R3400 Technical data - Rendamax

Rendamax
Modification
Modifications to the installation may only be carried out with the written approval of the manufacturer.
Danger of explosion
When activities are being undertaken in the boiler room, always follow the applicable instructions
“Working in an area where there is a danger of explosion”.
Installation
The appliance must be installed by an authorised installer in accordance with the applicable national
and local specifications and regulations.
Carefully follow all the safety instructions.
Operation
In the event of a gas leak, switch off the unit and close the gas supply valve. Open doors and windows
and warn the appropri ate authorities.
When the installation is re-commissioned, always follow the instructions for use.
Technical specifications
The specifications listed in this technical manual cannot be ignored.
4 Delivery and transport
4.1 Delivery
The appliances are completely assembled, tested and covered in a “heat-shrink” protective covering.
After delivery and removal of the protective covering, check the appliance for damage.
Check that the equipment delivered is in accordance with the order and the delivery note.
On delivery, check the data plate for the correct boiler type and gas supply pressure.
4.2 Packaging
For transport purposes, the unit is mounted on wooden blocks, fitted with protective bumpers
and and covered in a “heat-shrink” protective covering.
4.3 Transport
x
w
For transport, consult the technical details for dimensions and weight.
Remove the covering preferably after transportation and posi tioning in the boiler room or remove
the panels before trans porting the appliance. This is to prevent damage to the casing panels.
18 Doc890/3456CV02B