FELCOM 15 - Yachtronics

8. E-MAIL BY PC
Procedure
1. Press [F8] and [2] to display the System Setup menu.
2. Press the [↓] or [↑] key to choose Network Setup and then press the [Enter]
key.
3. Press the [↓] key to choose Mail Gateway and then press the [Enter] key.
4. Press the [↓] key to choose Delivery To and then press the [Enter] key.
5. Press the [↓] key to choose Server and then press the [Enter] key.
6. Press the [↓] key to choose Server IP and then press the [Enter] key.
7. Enter mail server IP address and then press the [Enter] key.
8. Press the [↓] key to choose Address Mode and then press the [Enter] key.
9. Press the [↑] or [↑] key to choose auto. (FIXED: Messages are delivered to
PC specified in Mail Address.)
10. Press the [↓] key to choose Mail Address and press the [Enter] key.
11. Enter the mail address corresponding to the mail server which is to receive
mail and then press the [Enter] key. Mail not containing the keyword will be
sent to this address.
12. Press the [↓] key to choose Auto Delivery Keyword.
13. Press the [Enter] key to open the auto delivery keyword entry window.
14. Enter auto delivery keyword. Enter characters (incl. symbol) not normally
found in your e-mail documents. Maximum 15 characters may be entered.
Upper and lower case letters are not distinguished in the search for keyword.
15. Press the [Esc] key to open the update window.
16. Yes is selected; press the [Enter] key to update settings. The message
“Press ESC key to Restart FELCOM 15.” Is displayed.
17. Press the [Esc] key to restart.
8-14