FELCOM 15 - Yachtronics

2. SYSTEM INITIALIZATION
Note: To restore all default color settings, choose Window Color from the
Terminal Setup menu, choose Default Color, press the [Enter] key, and
then press the [Enter] key again.
15. Press the [Esc] key twice to return to the standby display.
2.3 Login and Logout
Each time the terminal unit is turned on, register your vessel with the Inmarsat C
system to enable communications between your vessel and an LES. This is
called login.
Note that you can transmit the distress alert or receive EGC messages even if
you are not logged in.
If you will not be using the FELCOM 15 for a prolonged period, you should
logout from the Inmarsat C system, before turning off the terminal unit. The
Inmarsat C system will then register you as inactive, notifying anyone trying to
call you that you are currently unavailable. If you do not log out before turning off
the power, some LESs may attempt to send a message to you. They may
charge your correspondent, even if you don’t receive the message.
2.3.1 Login
1. Confirm that “SYNC (NCS)” appears at the bottom of the screen.
2. Press the [F7] key to display the Options menu.
File Edit Transmit EGC Reports Logs Options Setup Position StopAlarm
Options
1. Login
2. Logout
3. Abort
4. Select NCS
5. Ocean Region
6. LES Information
7. Test
Options menu
3. Press the [1] key to display the Login screen.
Options
Login
Start
Yes
No
Login screen
2-8