Model 28624TN - Ready Remote

More documents

Recommendations

Info

Wiring Quick Reference Guide Heavy Gauge Wires BLUE WHITE (+) PINK GREEN (+) output to ign/acc2 circuit PINK YELLOW MOMENTARY SWITCH PORT ANTENNA CABLE PORT SENSOR PORT YELLOW/RED (-) lock or (+) unlock output WHITE/RED (-) unlock or (+) lock output H1 Fused light flash jumper Black (-) Heavy guage ground wire YELLOW (+/-) parking light output BROWN/WHITE (-) factory alarm disarm output VIOLET (-) negative hood pin shutdown output ORANGE (+) brake input WHITE/BLACK (-) 400mA status output RED/WHITE (-) remote start activation GREEN Tachometer input BLUE (-) 400mA horn/siren output RED/BLACK (-) wait-to-start input YELLOW/GREEN (+) ignition output GREEN/WHITE (-) 400mA trunk release output BROWN (-) 400mA RAP, Dome light, Starter kill output YELLOW/BROWN (-) 400mA Headlight output GRAY/BLACK (-) Door trigger input H2 © 2006 Directed Electronics 7
H1 Harness - 6 pin connector H1/1 H1/2 H1/3 H1/4 H1/5 ___ ___ ___ ___ ___ YELLOW BROWN/WHITE VIOLET ORANGE WHITE/BLACK (+/-) parking light output (-) factory disarm output (-) hood pin shutdown input (+) brake switch shutdown input (-) 400mA status output H1/6 ___ RED/WHITE (-) remote start activation input Pin # Color Note H1/1 Yellow Selectable positive or negative parking light output H1/2 Brown/White Use this wire if the vehicle is equipped with a factory alarm. Connect to disarm wire listed on your sheet. H1/3 Violet Connect this wire to supplied hood pin switch H1/4 Orange Connect this to wire in vehicle that shows 12 volts when brake is pressed H1/5 White/Black Provides a ground during remote start. This wire is normally connected to a bypass module if your vehicle needs one. H1/6 Red/White This wire will start the vehicle when it sees two negative pulses. Only used when incorporating into existing alarm or for testing purposes. 8 © 2006 Directed Electronics
Page 1 and 2: Model 28624TN ➤Owner’s/Installa
Page 3 and 4: OR IN CONNECTION WITH THE INSTALLAT
Page 5 and 6: 2 © 2006 Directed Electronics
Page 7 and 8: important information Congratulatio
Page 9: TO THE VEHICLE. ALL DOORS LEADING F
Page 13 and 14: H3 harness - 3 pin connector H3/1 H
Page 15 and 16: Ground Wire The BLACK wire connects
Page 17 and 18: With the key in the off position, t
Page 19 and 20: Accessory and Starter wires The sta
Page 21 and 22: Many Nissan and late-model Chrysler
Page 23 and 24: Parking light flash There are sever
Page 25 and 26: Using a sharp, pointed object poke
Page 27 and 28: All other door lock systems will re
Page 29 and 30: Tachometer Wire WARNING! In the fol
Page 31 and 32: Following is a brief description of
Page 33 and 34: Headlight Control wire The Yellow/B
Page 35 and 36: 32 © 2006 Directed Electronics
Page 37 and 38: Step 7, Programming Programming tra
Page 39 and 40: Transmitter Button Programming Char
Page 41 and 42: option a. Option 1: Press the trans
Page 43 and 44: Feature Menu 1 Descriptions 1. Engi
Page 45 and 46: 1. Horn: The output will be pulsed
Page 47 and 48: 2. Passive: The doors will lock whe
Page 49 and 50: 11. Acc pulse/DomeLight/ Starter Ki
Page 51 and 52: Alarm Input Chart LED Flashes Input
Page 53 and 54: Last Start Diagnostics: The system
Page 55 and 56: Testing the system Once steps 1-7 h
Page 57 and 58: 4. Turn the key to the "run" positi
Page 59 and 60: Check to ensure that the hood is no
Page 61 and 62:
Owner’s Guide Now that the instal
Page 63 and 64:
OPERATING YOUR SYSTEMS FEATURES The
Page 65 and 66:
➤ The user steps on the brake as
Page 67 and 68:
To de-activate Daily Start: ➤ Pre
Page 69 and 70:
Alarm and Security Features Transmi
Page 71 and 72:
Transmitter Disarming the Alarm To
Page 73 and 74:
Valet Mode Valet Mode will defeat t
Page 75 and 76:
➤ Press and hold for 3 seconds th
Page 77 and 78:
Notes _____________________________
Page 79:
The company behind this system is D
show all

Model 28624TN - Ready Remote

Create successful ePaper yourself

Delete template?

Save as template?