SECTION 1: 2007-2012 BIG TWINS - S&S Cycle
SECTION 1: 2007-2012 BIG TWINS - S&S Cycle
SECTION 1: 2007-2012 BIG TWINS - S&S Cycle
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>2007</strong>-<strong>2012</strong> <strong>BIG</strong> <strong>TWINS</strong><br />
S&S ®<br />
GEAR DRIVE CAM KITS<br />
FEATURES AND BENEFITS<br />
• Improves valve timing accuracy by eliminating timing chain lash<br />
• Easy Start cams allow stock starter to start any engine<br />
• No tensioner shoes to wear out or fail<br />
OPTIONS<br />
Which S&S Gear Drive Cam Kit to Order<br />
• If updating a stock chain drive system, it's easiest to order a complete kit. Includes:<br />
• Camshafts with inner gears<br />
• Outer cam drive gear kit<br />
• Camshaft installation kit<br />
• If replacing cams in an engine already equipped with S&S gear drive cams, order<br />
cams with inner gears and reuse the existing outer gears. Camshaft installation kit for<br />
the appropriate model year is recommended.<br />
• If installing a set of gear drive cams from another manufacturer, order S&S cam gear<br />
kits for the appropriate model year. Each kit provides the inner cam gear as well<br />
as an outer cam gear. Camshaft installation kit for the appropriate model year is<br />
recommended.<br />
Gear Drive Easy Start Cams for early models<br />
WATCH THE S&S EASY START CAMS CRANK TEST<br />
VIDEO AT SSCYCLE.COM/MEDIA/VIDEOS.PHP<br />
PERFORMANCE<br />
PARTS<br />
Parts for<br />
Twin Cam 96 /103 <br />
<strong>2007</strong>-<strong>2012</strong><br />
Parts for<br />
Twin Cam 88 ®<br />
1999-2006<br />
Parts for<br />
Evolution ®<br />
1984-1999<br />
Parts for<br />
Sportster ® & Buell ®<br />
1986-<strong>2012</strong><br />
Parts for<br />
Vintage Engines<br />
1926-1984<br />
Cam Name<br />
S&S GEAR DRIVE CAMS FOR <strong>2007</strong>-'12 MODELS<br />
Easy Start<br />
Standard<br />
Complete Kit<br />
Cams w/ Inner<br />
Gears<br />
Complete Kit<br />
Cams w/<br />
Inner Gears<br />
510 – – 33-5266 33-5246<br />
551 106-5737 106-5736 106-4868 106-4870<br />
557* 330-0057 330-0056 330-0109 330-0110<br />
570 106-5221 106-5220 33-5267 33-5247<br />
583 106-5811 106-5810 330-0111 330-0112<br />
585 106-5225 106-5224 33-5268 33-5248<br />
625 106-5229 106-5228 33-5269 33-5249<br />
640 106-4850 106-4849 33-5270 33-5250<br />
675 106-5741 106-5740 330-0113 330-0114<br />
Note: 2006 Dyna® uses <strong>2007</strong>-'12 style cams.<br />
•For Harley-Davidson® Tri Glide® models.<br />
INSTALLATION KITS for S&S Gear DRIVE CAM (recommended)<br />
Models<br />
Standard Cam Kit<br />
2006 Dyna® and all <strong>2007</strong>-'12 big twins 106-6068<br />
Includes a gearcover gasket, cam bearings and instructions.<br />
106-6068<br />
106-5723 Oil passage block-off kit<br />
Use this kit to block oil passages in<br />
cam plate when hydraulic cam chain<br />
tensioners are removed to install gear<br />
drive cams. Fits any cam plate designed<br />
for hydraulic tensioners. This oil passage<br />
block-off kit is included in the cam<br />
installation kit, part #106-6086.<br />
Parts for<br />
X-Wedge®<br />
<strong>2007</strong>-<strong>2012</strong><br />
Parts for<br />
Victory®, Off-road<br />
& Metric<br />
Racing<br />
Products<br />
Tools & Shop<br />
Supplies<br />
Dealer Services<br />
& Promo Items<br />
NOTES:<br />
• Fuel injection tuning required.<br />
• Pinion shaft run-out must be checked before installing S&S® gear drive cams.<br />
• A hydraulic press and other professional tools are required to install S&S gear drive cams. Additionally, material must be removed from the inner surface of the stock gearcover. The<br />
stock crankcase may require clearancing for S&S .625", .640", and .675" lift cams. S&S recommends that gear drive cams be installed by a professional mechanic.<br />
• Due to the inherent characteristics of gear drives, you may experience more valve train noise with gear driven cams. Oversized and undersized gears are available to help achieve<br />
correct gear lash. We have found that with 160 lb. of valve seat force, the S&S gear drive cams will perform well up to 6200 rpm. If higher rpm is anticipated, valve springs that<br />
provide higher seat force should be used.<br />
• S&S can do a special order cam. Contact your S&S Customer Service Representative for more information.<br />
Warranty &<br />
Company Policy<br />
OEM Cross Reference<br />
Appendix & Index<br />
Visit us at www.sscycle.com<br />
1-33