SECTION 1: 2007-2012 BIG TWINS - S&S Cycle
SECTION 1: 2007-2012 BIG TWINS - S&S Cycle
SECTION 1: 2007-2012 BIG TWINS - S&S Cycle
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>2007</strong>-<strong>2012</strong> <strong>BIG</strong> <strong>TWINS</strong><br />
S&S ®<br />
Die Cast ROCKER COVERS<br />
Produced using the die-casting manufacturing process and then machined with computer<br />
controlled equipment. Includes Viton® o-ring style cover seals for leak-free operation.<br />
PERFORMANCE<br />
PARTS<br />
Parts for<br />
Twin Cam 96 /103 <br />
<strong>2007</strong>-<strong>2012</strong><br />
FITMENT<br />
• All Twin Cam 96/103 big twins<br />
• Sold as stock in 41/8" bore S&S engines<br />
Parts for<br />
Twin Cam 88 ®<br />
1999-2006<br />
FEATURES AND BENEFITS<br />
• Special rocker arm supports are included<br />
• S&S rocker covers are finished with show-quality chrome<br />
• Installation on stock and most comparable sized engines can be performed<br />
without removing the engine from the frame<br />
• Clearanced to permit valve lifts up to .640" using S&S valve spring packages<br />
and stock rocker arms or S&S roller rocker arms<br />
• S&S rocker covers accept valve springs up to 1.660" O.D. without modification<br />
• Exclusive one way valve built into the rocker cover gasket to control oil carry over<br />
KIT CONTENTS<br />
• Front and rear covers<br />
• All necessary gaskets and o-rings<br />
• Mounting hardware<br />
Parts for<br />
Evolution ®<br />
1984-1999<br />
Parts for<br />
Sportster ® & Buell ®<br />
1986-<strong>2012</strong><br />
Parts for<br />
Vintage Engines<br />
1926-1984<br />
Parts for<br />
X-Wedge®<br />
<strong>2007</strong>-<strong>2012</strong><br />
PART NUMBER<br />
S&S Die Cast Rocker Cover ...........................<br />
TÜV 2 90-4110<br />
90-4110<br />
Parts for<br />
Victory®, Off-road<br />
& Metric<br />
Racing<br />
Products<br />
Tools & Shop<br />
Supplies<br />
Any Job is easy with the right tools<br />
S&S Rocker Cover Wrench Set, see page 9-10<br />
Replacement parts on page 1-66<br />
Notes:<br />
• If using valve spring packages with taller than stock installed height, some minor<br />
clearancing may be required.<br />
• Cylinder heads must be set up correctly for high lift cams, and it remains the builder’s<br />
responsibility to confirm all clearances.<br />
• In most instances, only minor clearancing is required to use S&S rocker covers with valve<br />
springs larger than 1.660" O.D.<br />
EXTRA PARTS NEEDED:<br />
• S&S® rocker covers are required if S&S cylinder heads are used with S&S electric<br />
compression releases.<br />
Dealer Services<br />
& Promo Items<br />
Warranty &<br />
Company Policy<br />
OEM Cross Reference<br />
Appendix & Index<br />
Visit us at www.sscycle.com<br />
1-51