SECTION 1: 2007-2012 BIG TWINS - S&S Cycle

S e ction 1:
S&S ®
Parts for
Twin Cam 96 /103
2007-2012
Parts for
Twin Cam 88 ®
1999-2006
PERFORMANCE
PARTS
FORGED ROLLER ROCKER ARMS
Forged from 8620 steel, heat-treated, and then shot-peened for additional strength and
protection from fatigue, our roller rocker arms were designed to eliminate failure-prone stress
areas found in some other rockers. Most rockers come equipped with 1⁄2" long bushings or
needle bearings, however ours utilize ¾" long bronze bushings. The end result is what we
believe to be the finest rocker arm available anywhere, for any price.
FITMENT
• 1999-'12 big twins
2007-2012 BIG TWINS
900-4065A
Parts for
Evolution ®
1984-1999
Parts for
Sportster ® & Buell ®
1986-2012
Parts for
Vintage Engines
1926-1984
Parts for
X-Wedge®
2007-2012
FEATURES AND BENEFITS
• Extremely durable rollers reduce valve stem side thrusting with high lift cams
• Superior wear and fatigue resistance even in the most demanding applications
• ¾" long bushings provide 50% more bushing support area than 1⁄2" long bushings
KIT CONTENTS
• 2 front and 2 rear rocker arms
PART NUMBERS
Set of 4 rocker arms ....................................900-4065A
Replacement parts:
Front exhaust or rear intake. . . . . . . . . . . . . . . . . . . . . . . . . . . . 900-4065FA
Rear exhaust or front intake ...........................900-4065RA
Rebuild kits (rebuilds 4 rocker arms) .........................90-4104
Rocker arm bushing (¾" long) ..............................90-4014
Rocker arm shafts:
Set (includes 4) (H-D® #17611-83) ...............................90-4036
Individual ................................................90-4006
90-4036
S&S rocker arm shaft set
NOTE:
• Adjustable pushrods must be used with S&S roller rocker arms to obtain proper valve
clearance.
• New rocker arm shafts are recommended for maximum performance and rocker life.
• All reference to H-D® part numbers is for identification purposes only. We in no way are
implying that any of S&S Cycle’s products are original equipment parts or that they are
equivalent to the corresponding H-D® part number shown.
Parts for
Victory®, Off-road
& Metric
Racing
Products
S&S ®
STANDARD FORGED ROCKER ARMS
S&S now offers an economical solution for stock rebuilds, and mild performance upgrades. S&S standard rocker
arms are forged from 8620 steel for greater strength than stock forged or cast steel rocker arms. In addition, they
feature the same ¾" long rocker shaft bushings that our S&S roller rocker arms do. Thousands of hours of engine
testing have proved them to be superior to other non-roller rocker arms.
Tools & Shop
Supplies
Dealer Services
& Promo Items
Warranty &
Company Policy
OEM Cross Reference
Appendix & Index
FITMENT
• 1999-'12 big twins
FEATURES AND BENEFITS
• ¾" long bronze bushings provide 50% more load bearing area than
the 1/2" long bushings used in stock and other aftermarket rocker arms
KIT CONTENTS
• 2 front and 2 rear rocker arms
PART NUMBERS
Standard forged rocker arms ............................900-4119A
Replacement parts:
Front exhaust or rear intake (H-D® #17375-83A) ..............900-4119FA
Rear exhaust or front intake (H-D® #17360-83A). . . . . . . . . . . . . .900-4119RA
Rocker arm bushing (¾" long) ..............................90-4014
Rocker arm shafts:
Set (includes 4) (H-D® #17611-83) ...............................90-4036
Individual ................................................90-4006
TÜV
4,5
900-4119A
NOTE:
• S&S roller rocker arms are recommended for use with cams having more than 0.585" of
lift.
• New rocker arm shafts are recommended for maximum performance and rocker life.
• All reference to H-D® part numbers is for identification purposes only. We in no way are
implying that any of S&S Cycle’s products are original equipment parts or that they are
equivalent to the corresponding H-D® part number shown.
1-48
Order toll free 866-244-2673