Single Pillow Block - Heavy Series - Houston Bearing and Supply

PAGE 53
KETCHIE-HOUSTON, INC.
Four Bolt Flange - Standard Series - High Temperature
Replaces Fafnir LCJ
This Ketchie-Houston standard series, high
temperature four bolt flange unit is supplied
completely assembled and is mounted in place by
means of bolts through the flange. These units are
designed for applications in which the operating
temperature exceeds 250˚F.
These units use a standard series wide inner ring
bearing with an eccentric locking collar, high
temperature seals and high temperature grease.
These units can be operated up to 425˚F.
TO ORDER, SPECIFY KETCHIE-HOUSTON OR COMPETITOR’S PART NUMBER
Ketchie Replaces Shaft A B C D E F G H J K Bearing Approx.
Houston Fafnir Diam. Number Unit
Wt.
in. in. in. in in. in. in. in. in. in. in. lbs.
mm mm mm mm mm mm mm mm mm mm
3
/ 4 3 3 / 8 2 1 / 7
2 / 16 1 5 / 32 1 51 27 41
/ 64 / 64 / 64 1 3 / 64 2 3 / 8 1 5 / 16
KH-1202-0-10A 85.7 63.5 11.1 29.4 45.6 10.7 16.3 26.6 60.3 33.3 GSWE012HHSS 1.75
3 3 / 4 2 3 / 4 1
/ 2 1 3 / 16 1 13 / 16
29
/ 64 5
/ 8 1 1 / 16 2 9 / 16 1 1 / 2
95.2 69.8 12.7 30.2 40.0 11.5 15.9 27.0 65.1 38.1
KH-1203-0-13A LCJ 1 GSWE100HHS 2.25
4 1 / 4 3 1 / 4
17
/ 32 1 9 / 32 1 31 / 32
29
/ 64
11
/ 16 1 3 / 16 3 1 3 / 4
107.9 82.6 13.5 32.5 50.0 11.5 17.5 30.2 76.2 44.4
KH-1204-0-12A LCJ 1 3 / 16 GSWE103HHS 3.00
KH-1205-0-13A LCJ 1 1 / 4 GSWE104HHS
4 5 / 8 3 5 / 8
17
/ 32 1 11 / 32 2 3 / 32
33
/ 64 3
/ 4 1 9 / 32 3 1 / 2 2 3 / 16
117.5 92.1 13.5 34.1 53.2 13.1 19.0 32.5 88.9 55.6
KH-1205-0-13A LCJ 1 7 / 16 GSWE107HHS 4.25
KH-1206-0-10A LCJ 1 1 / 2 5 1 / 8 4 9
/ 16 1 1 / 2 2 5 / 16
33
/ 64
13
/ 16 1 3 / 8 3 7 / 8 2 3 / 8 GSWE108HHS
130.2 101.6 14.3 38.1 58.7 13.1 20.6 34.9 98.4 60.3 5.25
KH-1207-0-11A 1 11 / 16 5 3 / 8 4 1 / 9
8 / 16 1 17 / 32 2 5 33 25
/ 16 / 64 / 32 1 3 / 8 4 1 / 8 2 1 / 2 GSWE111HHS
KH-1207-0-12A LCJ 136.5 104.8 14.3 38.9 58.7 13.1 19.8 34.9 104.8 63.5 GSWE112HHS 6.00
5 5 / 8 4 3 / 8 9
/ 16 1 11 / 16 2 19 / 32
43
/ 64
29
/ 32 1 1 / 2 4 7 / 16 2 3 / 4
KH-1208-0-12A LCJ 1 15 / 16 142.9 111.1 14.3 42.9 65.9 17.1 23.0 38.1 112.7 69.8 GSWE115HHS 7.00
6 3 / 8 5 1 / 8
21
/ 32 1 27 / 32 2 15 / 16
43
/ 64 1 3 / 32 1 23 / 32 4 3 / 4 3
161.9 130.2 16.7 46.8 74.6 17.1 27.8 43.7 120.6 76.2
KH-1209-0-13A LCJ 2 3 / 16 GSWE203HHS 8.75
6 7 / 8 5 5 / 8
11
/ 16 1 15 / 16 3 3 / 16
43
/ 64 1 1 / 4 1 27 / 32 5 3 / 8 3 5 / 16
174.6 142.9 17.5 49.2 3.2 17.1 31.8 46.8 136.5 84.1
KH-1210-0-13A LCJ 2 7 / 16 GSWE207HHS 11.50
Recommended shaft tolerances: 1 /2 ” - 1 15 /16", nominal to – .0005", – .013 mm;
2” - 2 15 /16", nominal to – .0010", – .025 mm