You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Tubes<br />
64<br />
The outer diameter of LeanTek ® tubes is 28.6 mm.<br />
2 wall thicknesses are offered: 1,25 mm for lightweight<br />
applications, and 2 mm for heavier applications.<br />
Tubes are available in a wide range of standard<br />
colours.<br />
Since we manufacture our own tubes, we can supply<br />
them in any non-standard colour you wish.<br />
LeanTek ® tubes are galvanized inside and out before<br />
receiving their 0.8 mm thermoplastic coating in our<br />
own production plants.<br />
Internal and external<br />
galvanization<br />
0.8 mm<br />
thermoplastic<br />
coating<br />
Advantages of<br />
Tubes<br />
Antirust treatment<br />
Conventional tubes usually do not have antirust protection on the outside of the tube<br />
and in some cases not on the inside either. The 2 consequences of rust are;<br />
a reduction in the strength of the tube , reduced strength of the application<br />
and the appearance of blisters on the thermoplastic coating.<br />
Tube thickness<br />
✗<br />
✔<br />
<strong>Trilogiq</strong> quote tube thicknesses corresponding to<br />
the thickness of the steel part only and not to<br />
the steel part + the plastic coating.treatment.<br />
✔<br />
<strong>Trilogiq</strong> tubes guarantee strength,<br />
durability and longevity of appearance<br />
by using full internal and external<br />
galvanisation before application of<br />
the thermoplastic coating in the factory.<br />
✗<br />
65