Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Connector joints<br />
Standard joints<br />
74<br />
<strong>Trilogiq</strong> has been designing, developing and continually<br />
improving the range of LeanTek ® joints ever since 1996.<br />
The range of 3D ® multi-directional connector joints is one<br />
of the results of this constant quest for innovation.<br />
Each joint is manufactured by an automated tool<br />
system; the only technique capable of delivering<br />
production stability and regularity.<br />
Joints are finished with a reinforced black zinc coating,<br />
which delivers an attractive finish, guaranteed corrosion<br />
resistance (even in severe environments) and high impact<br />
resistance.<br />
Advantages of<br />
✗<br />
Connector joints<br />
✗<br />
✔<br />
Large size joints<br />
Main advantages of large size<br />
LeanTek ® connectors: easier fitting<br />
and above all greater shock<br />
resistance giving better durability<br />
to the application.<br />
✔<br />
Black zinc coating<br />
Over the last 10 years <strong>Trilogiq</strong> have<br />
observed that paint on connectors<br />
does not stand up to the passage<br />
of time: the paint very often peels<br />
off in sheets, allowing rust to enter.<br />
Consequently <strong>Trilogiq</strong> have opted for<br />
black zinc treatment for LeanTek ®<br />
connectors. This treatment offers<br />
greatly enhanced qualities of strength<br />
and durability compared to paint.<br />
75