• ANGLAIS TECH - Trilogiq

Reinforcing applications –
Diagonal bracing
168
Reinforcement becomes a necessity in applications
subject to significant levels of impact and loading.
LeanTek ® offers a range of products specially
designed to perform under severe loading
conditions, including 2 mm tubes, Metal-Base ®
bases and roller tracks on reinforced profiles.
There are 2 main ways of reinforcing an
application:
• In terms of the structure: by increasing the
number of diagonal braces (components F-F,
F-G, F-K, F-L, F-L30 and F-L60)
• In terms of the roller tracks: by increasing the
number of tracks or using reinforced tracks
(RT-400 and LW-400).
F-L Diagonal
45°
45°
FL-30 Diagonal
30°
30°
30°
FL-60 Diagonal
30°
60°
60°
30° 30°
30°
60°
F-F Diagonal
F-K Diagonal
FL-30 and FL-60 Diagonal
60°
Using the F-T and F-G joints
Special shapes
Using F-G connector joints in conjunction with F-T connectors
allows tubes to be connected end-to-end to create any angle.
This makes it possible to create work surfaces in special shapes
and corner racks.
Tube doubling
Where load strength is required, the
F-I component allows tube doubling
to take the strain.
169