LASER PRINTER ML-1200 Series
LASER PRINTER ML-1200 Series
LASER PRINTER ML-1200 Series
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Disassembly and Reassembly<br />
3-6 HVPS Board<br />
1. Before you remove HVPS board, you should remove:<br />
•Main Cover (see [3-1 Main Cover])<br />
2. Remove four screws and a connector from HVPS<br />
board, then take the board out.<br />
Note<br />
When you reassemble the HVPS board, make<br />
sure that five terminals should be put in place.<br />
3-7 Fuser Assembly<br />
1. Before remove fuser assembly, you should remove:<br />
• Main Cover (see [3-1 Main Cover])<br />
2. Remove two ground screws and a connector as illustrated.<br />
Terminal<br />
3. Remove two screws and unplug a fuser assembly<br />
harness. Then use a " - " screwdriver to unlatch the<br />
fuser assembly to remove.<br />
3-4 Samsung Electronics
Change language