IC693PCM300 - GE Fanuc PLC Distributor In Stock! 90-30 90-70 ...

2
3. To enter a Memory Expansion board (for Series 90-70 systems only), press Expansion
Board (F9) and then Memory (F1). The following list is displayed.
PCM Configuration Data
4. Cursor to the desired catalog number, and press the Enter key.
5. After selecting the desired memory expansion board, press the Escape key to return
to the PCM detail screen.
After selecting the module and the expansion memory, the PCM is configured for CCM
and/or MegaBasic operation from the PCM module detail screen. The PCM
configuration mode is selected from the Config Mode field on the detail screen.
To select a different configuration mode, repeatedly press the Tab key until the desired
mode is displayed on the screen. Then, press the Enter key. Use the Cursor and Tab
keys to complete the detail screen for the desired configuration mode, and press the
Enter key.
PDFsupply.com
Once the PCM has been configured, press the Escape key again to save the module
configuration and return to the rack display. The display screen should now include the
PCM in the slot you selected. Complete the configuration procedure for each module
you wish to add to the Series 90 PLC rack.
Once the Series 90 system configuration is complete, Logicmaster 90 software is used to
store the configuration to the PLC CPU. If the PCM configuration has changed since the
last configuration store, the PCM is automatically reset and restarts using the new
configuration.
GFK-0255K
Chapter 2 Installing the PCM
2-9