condair cP3 D

41
Description of the control mode settings
– Manual: The steam generator must be switched on and off via the Start/Stop key
in the operating display.
CP3 D45 400V3
Steam Bath :Standby
Temperature :34°C
Setpoint :48°C
05.05.2008 12.00.00
Start Light
Menu
CP3 D45 400V3
Steam Bath :Heating
Temperature :37°C
Setpoint :48°C
05.05.2008 12.05.00
Stop Light
Menu
– Timer: The steam generator is switched on and off time controlled via the day
timer. The timer settings can be accessed by pressing the key in
the operating display.
CP3 D45 400V3
Steam Bath :Standby
Temperature :34°C
Setpoint :48°C
05.05.2008 12.00.00
Timer
Light
Menu
Timer
Status :Off
Start time :18:00
Duration :15min
Esc
Set
– Status: activate (On) or deactivate (Off) timer function
– Start time: set starting time (format: hh:mm)
– Duration: Set heating time in minutes
6.6.3 Setting the fragrance pump settings
Aroma
Pump
:On
Interval :5min
Impulse :3s
Esc
Set
Select “Aroma” in the main menu, then press the key. The
fragrance pump settings appear. Press the < > and < > keys in order
to select the individual settings and press the key to call up the
modification dialogue for the selected setting.
Description of the fragrance pump settings
– Pump: Activating and deactivating the fragrance pump.
Factory setting: On
Options:
On (Pump activated)
Off (Pump deactivated)
– Interval: Setting the interval time in minutes for the pump impulses.
Factory setting: 5 min
Setting range: 2 ... 20 min
– Impulse: Setting the duration for a pump impulse in seconds.
Factory setting: 3 s
Setting range: 2 ... 10 s