Details relating to the unit MDE 40 2 Details relating to the unit 2.1 Use in accordance with specifications The small compact drier MDE 40 is used exclusively to dry hygroscopic plastics granulates. 2.2 Technical data 2.2.1 <strong>Small</strong> compact drier Dry air volume ........................................................................................................................................ 40 m 3 /h Heating capacity of regeneration air heater, per cartridge ..................................................................... 1,0 kW Inductive load (motor) .......................................................................................................................... 0,25 kVA Ohmic load ...................................................................................................................................... max. 1,0 kW Operating voltage ............................................................................................................ 1 / 230 V/N/PE/50 Hz Power consumption ......................................................................................................................... approx. 6 A Max. connected load .............................................................................................................................. 1,3 kW Weight .......................................................................................................................................... approx. 60 kg Noise level ........................................................................................................................................... < 70 dBA Dimensions ...................................................................................................................................... see Fig. 2-1 2.2.2 Drying bins Temperature range ........................................................................................................................ 60 to 140 °C Heating capacity, per bin ........................................................................................................................ 1,5 kW Operating voltage ............................................................................................................ 1 / 230 V/N/PE/50 Hz Connected load with 230 V, per bin ................................................................................................ approx. 7 A Max. connected load ............................................................................................................................ 1,55 kW Volume ................................................................................................................................. 15, 30 and 60 liters Number of drying bins, volume 15 and 30 liters ................................................................................. max. 2 off Number of drying bins, volume 60 liters ...................................................................................................... 1 off Weight (net)15/30/60 liters ................................................................................................. approx. 12/15/20 kg Dimensions ...................................................................................................................................... see Fig. 2-1 Performance range (in kg/h at a residual moisture content of 0,02 %) Examples Material MDE 40/15 max. kg/h* MDE 40/30 max. kg/h* MDE 40/30 max. kg/h* ABS 4,5 9,0 18,0 PA 6 1,5 3,0 9,0 PA 6.6 1,5 3,0 9,0 PC 4,5 9,0 18,0 PEEK 4,0 8,0 16,0 PBTP 3,0 6,0 12,0 LCP 3,0 6,0 12,0 PPS 4,0 8,0 16,0 PSU 4,0 8,0 16,0 *dependent of bulk density, residence time and initial humidity 2.1
Details relating to the unit MDE 40 <strong>Small</strong> compact drier Drying bins 15 liters 30 liters 60 liters Connecting flange * Connection for hopper loader prepared ** Option Fig. 2-1 Dimensions: <strong>Small</strong> compact drier and drying bins 2.2