Operating Manual Hopper loader

More documents

Recommendations

Info

9 Maintenance and repair Maintenance and cleaning METRO 0.5 to 1.5 Fig. 9.2 – Screen filter [1] Screen filter [2] Filter fastener rod Prepare the hopper <strong>loader</strong> for maintenance (see "Maintenance and repair" on Page 32). Open the spring clips on the top of the unit. Open the cover. Remove the screen filter. Tap the screen filter to clean it and clean the screen filter with a vacuum cleaner. Check its condition and if necessary replace the screen filter. Structure Fig. 9.3 – Replace screen filter [1] Screen filter [2] Fastener ring Insert the screen filter so the screen filter seal contacts the fastener ring [2]. Check that the screen filter [1] is correctly positioned, i.e. the rods of the filter fastener (see figure 9.2) are not in the vicinity of the vacuum valve. MALFUNCTION! CAUTION! The required vacuum may not be generated if the rods of the filter fastener project above the hopper housing. Never force the cover closed. Make sure that the screen filter is precisely positioned and that the rods do not project above the hopper housing. Close the cover and lock it with the spring clips. 34 Edition: November 2005
METRO 0.5 to 1.5 Maintenance and repair 9 Maintenance and cleaning Note The screen filter clogs up faster when regrind material is transported. Reduce cleaning intervals appropriately. 9.4.2 Check inlet flap Fig. 9.4 – Check inlet flap [1] Check inlet flap Prepare the hopper <strong>loader</strong> for maintenance (see "Before starting work" on Page 32). Remove the screen filter (see "Clean screen filter." on Page 33). Check the inlet flap [1] for wear (see arrows in the magnified view). Edition: November 2005 35
Page 1 and 2: Hopper loader METRO 0.5 to 1.5 Oper
Page 3 and 4: METRO 0.5 to 1.5 Technical specific
Page 5 and 6: METRO 0.5 to 1.5 Technical specific
Page 7 and 8: 4 Transport and setup Connections M
Page 9 and 10: 4 Transport and setup Connections M
Page 11: 5 Structure and function Function M
Page 15 and 16: METRO 0.5 to 1.5 Maintenance and re
Page 17 and 18: METRO 0.5 to 1.5 Maintenance and re
Page 19 and 20: 11 Option Implosion filter option M
Page 21 and 22: METRO 0.5 to 1.5 Appendix 12 METRO
Page 23 and 24: METRO 0.5 to 1.5 Appendix 12 METRO
Page 25 and 26: METRO 0.5 to 1.5 Appendix 12 Multif
Page 27 and 28: 12 Appendix Multifunction panel MET
Page 29 and 30: A B C D E 2 A1 +ZSW PE + 24V M VACV
Page 31: A B C D E 2 3 4 5 6 7 8 A1 +ZSW PE

Operating Manual Hopper loader

Create successful ePaper yourself

Delete template?

Save as template?