Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
9 Maintenance and repair<br />
Repair work METRO 0.5 to 1.5<br />
9.5 Repair work<br />
9.5.1 Disassemble METRO 0.5-1 to 1.5-1 hopper <strong>loader</strong> into its modules<br />
6<br />
A<br />
B<br />
Fig. 9.5 – METRO H** hopper <strong>loader</strong>s<br />
[A] METRO HC/J*<br />
[B] METRO HP*<br />
[1] Profile clamp<br />
[2] Ground terminal<br />
[3] Seal<br />
[4] Screw<br />
[5] Multifunction panel<br />
[6] Ground (glass units only)<br />
Separating modules<br />
Material damage!<br />
Parts which fall into the unit may cause operational faults.<br />
CAUTION!<br />
Make sure that no parts fall into the unit.<br />
Cover the opening of the machine and bin.<br />
Prepare the hopper <strong>loader</strong> for maintenance (see "Before starting work" on Page 32).<br />
To separate the module, slacken the screw [4] and remove the profile clamp [1] (also the ground<br />
for glass units [6]).<br />
Disengage the module.<br />
Remove the seal [3].<br />
Remove the ground clamp [2].<br />
36 Edition: November 2005