FinePix 6900 Zoom Manual - Fujifilm Canada

` AUTO POWER SAVE SETTING
Once you enable this function, the monitor is
temporarily switched off to reduce power
consumption (Sleep mode) if the camera is not
used for about 30 seconds. If the camera is then
left unused for a further time (2 or 5 minutes), it
is automatically switched off. Use this function
when you want to get the maximum possible
running time from the battery.
When the camera is in sleep mode, pressing the
shutter button down halfway brings the camera
back to full operational mode. This is a useful
feature as it allows you to take pictures more
quickly than switching the camera off and then
on again.
100
●! Auto Power Save is disabled during automatic
playback and when a USB connection is being used.
The Sleep function does not operate in
Playback mode, but the camera is
automatically switched off if it is left unused
for some time (2 or 5 minutes).
●! Camera operation can also be restored by pressing
buttons other than the shutter button.