FinePix 6900 Zoom Manual - Fujifilm Canada

PHOTOGRAPHY MENU
E SETTING THE WHITE BALANCE
2 3
68
Using the light source for which you want to set
the white balance, hold a sheet of white paper
so that it fills the entire screen.
When you press the “&^* /!” button, a measurement
is taken and the white balance is set.
●! The white balance setting does not affect the image
shown on the screen.
To use the white balance set previously,
press the “MENU/OK” button without
pressing the “&^* /!” button.
If “œ” or “§” is displayed, the white
balance was not measured at the correct
exposure. Reset the white balance.
●! After you take the picture, you should check the
“Color (White Balance)” setting for the image.
• Set “IMAGE DISPLAY” in the SET–UP menu to
“PREVIEW” (➡P.98).
• Set the Mode switch to “2” (➡P.33).
◆ Example ◆
You can deliberately change the white
balance for a photographed image by using
colored paper instead of white paper.