ViviCam T028 Camera Manual - Vivitar

More documents

Recommendations

Info

Photo Capture Mode Quick Function Buttons Your digital camera has a four-directional pad that functions as Quick Function buttons: Button Left Up Function Scene Selection – Opens the Scene menu Flash Options – Toggles the Flash options appearing on the LCD Right Down Delete – Opens the „Delete This Photo‟ option and allows you to view and delete the last photo taken ViviLink – Opens the ViviLink for Photos menu Other Shutter Captures the photo SET MODE Opens the menu options for Photo Capture Mode Saves your selected menu option Note: To navigate through the Menus, use the UP/DOWN/LEFT/RIGHT direction control buttons. Toggles between the Photo Capture Mode, Video Capture Mode and Playback Mode Exits the menu screen T W Zooms In Zooms Out 15
Flash Options There are several Flash options available on your camera. The options appear on the Photo Capture Mode LCD screen in sequence. To change the Flash mode, press the UP Quick Function button until you arrive at your desired settings. Important: When using Flash, stand between 8 to 10 feet away from the scene you would like to capture. Note: The MACRO mode must be turned OFF when you want to use the Flash. To turn off MACRO mode: Slide the MACRO Switch down to the mountain icon . When MACRO is OFF, the mountain icon appears on the LCD display. Flash Type Description No flash will appear. Forced Off (Default) A Auto Flash Forced On Red Eye Reduction Use this when you do not want to activate Flash. NOTE: A „Turn On Flash‟ message appears when the camera detects a need for flash. When this message appears, it is recommended to press the Flash/Up button and select one of the flash options: Auto Flash, Forced On or Red-Eye Reduction. When you want the camera to determine if Flash is needed, select Auto Flash. The flash will automatically turn on according to the lighting conditions. When the LED light stops blinking, the Flash is ready for use. Note: In some cameras, an initial flash appears to test your lighting conditions. If flash is needed, a second flash will appear upon taking the photo. The flash is enabled for each photo. Note: If you use this option in a well lit environment, your photo may be appear too bright/light (overexposed). Eliminates the red-eye effect in a photo caused by flash. 16
Page 1 and 2: ViviCam T028 Digital Camera User Ma
Page 3 and 4: Introduction Thank you for purchasi
Page 5 and 6: Initial Camera Setup Installing the
Page 7 and 8: Setting the Camera Language 1) You
Page 9 and 10: Camera Technical Specifications Ima
Page 11 and 12: Powering the Camera On/Off Make s
Page 13 and 14: Navigating the Menus Each camera mo
Page 15: Taking a Self Portrait Picture You
Page 19 and 20: Photo Capture Mode Menus The follow
Page 21 and 22: 7) Press the MODE button to exit th
Page 23 and 24: Face Detect Menu The Face Detect fe
Page 25 and 26: Multi SnapShots Menu When enabled,
Page 27 and 28: When the ISO is reduced, the image
Page 29 and 30: To Enable/Disable the Timestamp: 1)
Page 31 and 32: Frequency Menu The options in the F
Page 33 and 34: Photo Playback Mode The Playback Mo
Page 35 and 36: Photo Playback Mode Menus The follo
Page 37 and 38: Rotate Menu Use this menu to rotate
Page 39 and 40: Slide Show Menu You can view a Slid
Page 41 and 42: Video Capture Mode Quick Function B
Page 43 and 44: Scene Menu The Scene Menu allows yo
Page 45 and 46: 8) An icon reflecting your selectio
Page 47 and 48: sensitivity to light however, may r
Page 49 and 50: Date/Time Menu When you capture an
Page 51 and 52: 7) Press the MODE button to exit th
Page 53 and 54: Video Playback Mode The Playback Mo
Page 55 and 56: Video Playback Mode Menus The follo
Page 57 and 58: menu. 3) Press the UP or DOWN direc
Page 59 and 60: 5) If you have internet access, the
Page 61 and 62: Get Started! Using the Vivitar Expe
Page 63 and 64: Sakar Warranty Card This warranty c

ViviCam T028 Camera Manual - Vivitar

Create successful ePaper yourself

Delete template?

Save as template?