dectron_design - RJI-Sales.com
dectron_design - RJI-Sales.com
dectron_design - RJI-Sales.com
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Natatorium<br />
Standard Design Features<br />
Double-Wall Pool Water Heater<br />
All pool water heating DRY-O-TRON®<br />
units are equipped with a coaxial,<br />
counterflow, cupro-nickel, vented,<br />
self-draining refrigerant condenser<br />
which is suitable for potable water<br />
applications. Cross-contamination prevention<br />
is ensured.<br />
HyPoxy ® Coated Coils<br />
This standard coating for all air-side<br />
coils on pool applications provides<br />
superior corrosion protection while<br />
enhancing the performance of the coil<br />
due to its hydrophilic properties.<br />
Water Smart Mode<br />
Allows the DRY-O-TRON® to continue<br />
to run in the event of a loss of pool<br />
water flow in order to satisfy space<br />
temperature and relative humidity<br />
demands.<br />
Inverter Rated Insulation<br />
System Fan Motors<br />
These high-efficiency fan motors have<br />
a superior insulation system for<br />
excellent spike-resistance and moisture<br />
resistance.<br />
Oversized Evaporator Coil<br />
With 10 fins per inch, this deep and<br />
dense coil extracts the maximum<br />
amount of latent energy with the least<br />
amount of <strong>com</strong>pressor power consumption,<br />
giving the DRY-O-TRON®<br />
the industry’s best Moisture Removal<br />
Efficiency (MRE), expressed in lb. of<br />
moisture/kWh.<br />
Factory Testing<br />
Every DRY-O-TRON® undergoes a<br />
60-point quality control inspection<br />
under FULL load in one of the<br />
<strong>com</strong>pany’s four test chambers, which<br />
simulates an indoor pool environment.<br />
An industry first and still the<br />
industry’s best !<br />
Microprocessor Controller<br />
On-board diagnostics and troubleshooting<br />
<strong>com</strong>bined with an extensive<br />
list of points that are constantly being<br />
monitored, result in the most protected<br />
DRY-O-TRON® yet.<br />
Unit-Mounted Sensors<br />
Calibrated and tested at the factory.<br />
Set points are pre-programmed for<br />
each application as per user specifications.<br />
Air side sensors have tripledipped<br />
boards for long life.<br />
BI Fan Wheels<br />
On DRY-O-TRON® sizes 120 and up,<br />
AMCA certified Backward Inclined<br />
airfoil fan wheels are standard. Sizes<br />
102 and smaller use Forward Curved<br />
wheels.<br />
Full-sized Condenser (Reheat) Coil<br />
Also called a reheat coil, it is sized for<br />
the Total Heat of Rejection of the<br />
<strong>com</strong>pressor for maximum flexibility in<br />
all modes of operation, including the<br />
Water Smart mode.<br />
Corrosion-proof Drain Pan<br />
Indoor DRY-O-TRON® units have a<br />
one-piece, 12-gauge noryl resin drain<br />
pan with sanitary rounded corners.<br />
Outdoor DRY-O-TRON® units have a<br />
one-piece, 16-gauge galvanized drain<br />
pan painted with three coats of<br />
USDA-approved converted epoxy<br />
resin. The standard bottom drains are<br />
equipped with strainers.<br />
ENERGY RECYCLING DEHUMIDIFIERS & POOL WATER HEATERS FOR NATATORIUMS<br />
5