Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
4. Install Motor Drive onto Chain Base<br />
• Install the motor drive onto the chain base, being sure to align the hex<br />
drive with the hole in the 5 pointed drive sprocket. Once the motor is fully<br />
engaged with the chain base the control box is effectively locked into the<br />
chain base/motor drive assembly.<br />
• Secure with (4) #12-24 X 5/8” Ph FH Machine Screws in the locations<br />
shown.<br />
5. Install Motor Drive Cable<br />
Connect motor drive cable to the control unit as shown in the diagram.<br />
Important: The female connector on the end of the wire harness must be<br />
properly oriented with the male connector on the control unit or the motor<br />
system will not work.<br />
Connect<br />
motor drive<br />
cable to<br />
control unit<br />
10<br />
Did you find what you’re looking for? The <strong>Truth</strong> <strong>Hardware</strong> Web site is a great resource<br />
for the latest product and installation information. It’s available at www.truth.com