15-B Maintenance Mnl, GFZ-62075E/03 - Automation Service Srl

3. TROUBLESHOOTING AND ACTION TO BE TAKEN
B–62075E/03
(4) Displaying the type of an alarm
The type of the alarm issued is displayed.
When the alarm status is released, the corresponding bit is set to 0.
Number
Bit
1007 #15 #14 #13 #12 #11 #10 #9 #8
Number
Bit
1008 #7 #6 #5 #4 #3 #2 #1 #0
Each bit indicates an alarm type when 1 is displayed for the bit as follows:
#0 : Background P/S alarm
#1 : Foreground P/S alarm
#2 : Overheating
#3 : Sub–CPU error
#4 : Excessive synchronous error
#5 : Parameter writing switch on
#6 : Overtravel/external data input/output error
#7 : PMC error
#8 : External alarm message
#9 : Not used.
#10 : Serious P/S
#11 : Not used.
#12 : Servo alarm
#13 : I/O error
#14 : Input of a parameter requiring power disconnection
#15 : System error
(5) Displaying the warning status
The warning status is displayed.
When the warning status is released, the bit is set to 0.
Number
Bit
1009 #7 #6 #5 #4 #3 #2 #1 #0
A bit indicates the following status when 1 is displayed for it.
#0 : The system is in the warning state.
#1 to #7 : Not used.
– 34 –