User Manual

2DFace
c) Ar < W/2 d) Ar > W/2
Figure 2.3 (a ,b, c & d). Various arch types possible
Specify
back of
drive
Specify Sections of Current Drive
The user is allowed to specify sections of the current drive
(ie. back and floor sections). To define the back of the
drive, the user must click on the "specify back of drive"
icon and select in a clockwise direction the region that
will define the back holes (see Figure 2.4). Similarly, a
floor region may be defined by selecting the " specify floor
of drive " icon.
Specify
floor of
drive
176 JKSimBlast