User Manual

2DView
2. Open the Extra Hole Data Definition table. In
Microsoft Access, select the table and click [Open].
Enter a name for each data value under Field Name,
and a units of measurement for display under Field
Units. The ID number will automatically update for
each record (row). The fields can be entered in any
order.
3. Open the Holes table. In Microsoft Access, select the
table and click [Design]. Add a field (column) for each
of the data values in the Extra… table. The name of
each field must be exactly the same as that entered in
the Extra… table.
4. Open the Holes table for data entry. In the View menu,
select Datasheet. Enter the values for each hole under
the new columns. If the table contains more than one
set of hole data, check the Designs and Options tables
to determine which hole records belong to the relevant
blast. The data can be copied and pasted as a column
of data from another application if properly organised
beforehand, such as Microsoft Excel.
5. Close the Holes table, ensure that it has been saved and
exit the program. Open the blast in 2DView, create a
region and check that the new data appears in the list of
values on the Contour Control. Select the contour
value and continue as with standard values.
JKSimBlast 241