Manual Thermal Sealer - FluidX

For polypropylene and polystyrene microplates,
deepwell blocks and PCR plates.
Manual Thermal Sealer
Optimal seal integrity and consistency
Selectable temperature and time settings allow the user to specify optimal sealing conditions.
Constant temperature is maintained throughout the heating block for added reliability.
Compatible with a wide range of thermal seals and plate types.
The X-Seal Manual Thermal Sealer is able to accommodate standard plates, deep-well blocks and
differing PCR plate designs.
Quick and easy to use.
Simply place the seal and plate on the holder, closing the drawer will start the automated sealing
process. When completed the drawer re-opens and the sealed plate can be removed from the
holder.
Fast start-up
The X-Seal Manual Thermal Sealer uses a rapid heating element so it can be ready to use in
minutes. The actual temperature of the heating block is displayed.
Auto-standby function
After a specified time set by the user, the temperature of the heating element is lowered to 60 o C
reducing the amount of energy used.
Auto switch-off
The Manual Thermal Sealer will turn off automatically if left unused. The user is able to select the
timing for this function.
Wide range of thermal seals
FluidX provide a large choice of thermal seals that are ideal for use with the X-Seal Manual Thermal
Sealer.

Manual Thermal Sealer
A perfect seal every time - in less than 5 seconds.
Set time and temperature
required.
Open drawer.
Place the plate, with the
seal on top, onto the holder.
Close the drawer.
The sealing process will start
automatically.
Open drawer.
Remove sealed plate.
SPECIFICATIONS
Weight
9kg
Dimensions 310 mm x 275 mm x 181 mm (H x D x W)
Voltage 110/230V
Power
Sealing temperature
300W
130 - 190 o C
Plate formats
The X-Seal Manual Thermal Sealer is compatible with:
SBS format polypropylene and polystyrene plates and deep-well blocks.
PCR plates including skirted, non-skirted and semi-skirted variants.
(An adapter may be required).
Ordering Information Cat. No. 47-2001
X-Seal Manual Thermal Sealer for use with SBS-format polypropylene and
polystyrene microplates, deepwell blocks and PCR plates, (skirted, semi-skirted and
non-skirted formats).
Cat. No. 42-1005
Copper seal platten, optional. Place on seals during sealing process to eliminate risk
of curling.
FluidX reserve the right to update and change product information without notice. © FluidX Ltd. 2009.
Tel:+44 (0) 1625 861614 Email:info@fluidx.co.uk www.fluidx.co.uk