Manual Adhesive Sealer - FluidX

Seals 96, 384 and 1536 microplates and blocks.Manual Adhesive SealerThe X-Seal Manual Adhesive Sealer is compatible with all standard 96, 384 and 1536-formatmicroplates and blocks.Simple and quick operation, seals a plate within 4 secondsTo operate simply slide a plate into the left side of the sealer which then starts automatically. Theplate is pulled through without further assistance and is sealed in under 5 seconds. A rollermechanism is used to apply constant pressure ensuring a more uniform seal than compressionplate-based systems.Prevent heat damage to samples and platesAdhesive seals are widely used for short and long-term sample storage, thermal cycling and assayincubation. It is the preferred sealing method for applications where plates must be sealed andaccessed multiple times as heat damage to well chimneys is avoided.Even small temperature fluctuations are avoided making this sealer suitable for applications suchas protein crystallography and bacterial/cell culture growth.Wide selection of sealsFluidX offer a wide range of adhesive seals for use with the X-Seal Manual Adhesive Sealerincluding peelable, pierceable, optically clear and non-sticky pressure-sensitive seals.All demonstrate good integrity at low and high temperatures (suitable for temperatures as low as-80 o C and chemical resistance including DMSO.

Manual Adhesive SealerADHESIVE SEALSFor use with automated adhesive sealerAdhesive peelable aluminium sealing foilCat No 40-1001Good solvent resistance. Temp range -80 to 120 o C.Applications: Low temperature storage, PCR.Clear adhesive peelable polypropylene filmCat No 40-1006Good solvent resistance. Temp range -80 to 120 o C.Applications: PCRAdhesive pierceable aluminium sealing foilCat No 40-1002Good solvent resistance. Temp range -80 to 120 o C.Applications: Low temperature storage, PCR.Crystal clear adhesive peelable polypropylene filmCat No 40-1007Good solvent resistance. Temp range -80 to 110 o C.Pierceable.Applications: QPCR, fluorescence, crystallography andgenotyping. Non-sticky pressure sensitive adhesive.Clear adhesive peelable polyolefin filmCat No 40-1003Good solvent resistance. Temp range -25 to 120 o C.No contact between sample and adhesive.Non-sticky pressure-sensitive adhesive.Ideal for imaging and crystallography.Clear pre-pierced adhesive peelable polyolefin filmCat No 40-1004Good solvent resistance. Temp range -25 to 120 o C.Good gas exchange.Ideal for imaging and crystallography.Black adhesive peelable PE foilCat No 40-1010Good solvent resistance. Temp range -40 to 60 o C.Applications: Ideal for light sensitive applications.Pierceable adhesive silicone foilCat No 40-1011Excellent solvent resistance. Temp range -80 to 120 o C.Applications: Ideal for sealing plates containing DMSO.Gas permeable adhesive peelable membraneCat No 40-1005Poor solvent resistance. Temp range 10 to 120 o C.Good gas exchange, impervious to fluids.Applications: Enhances cell growth, suitable forautoclave use.Peelable adhesive silicone foilCat No 40-1012Excellent solvent resistance. Temp range -80 to 120 o C.Applications: Ideal for sealing plates containing DMSO.Non-stick pressure sensitive adhesive.ORDERING GUIDECat. No.Xcs-384DescriptionSemi-automatic adhesive foil or film plate sealer compatible with 96, 384 and 1536 wellmicroplates and blocks. Please select at least 1 adapter from below.45-1001 Glide-way for Xcs-384, standard shallow-well SBS microplates (eg Greiner / Matrix)45-1002 Glide-way for Xcs-384, standard deep-well SBS microplates (eg Greiner / Matrix)45-1003 Custom glide-wayFluidX reserve the right to update and change product information without notice. © FluidX Ltd. 2009.Tel:+44 (0) 1625 861614 Email:info@fluidx.co.uk www.fluidx.co.uk