8.28 MB - Edge-Core

Entering Commands
4
To enter the Global Configuration mode, enter the command configure in Privileged
Exec mode. The system prompt will change to “Console(config)#” which gives you
access privilege to all Global Configuration commands.
Console#configure
Console(config)#
To enter the other modes, at the configuration prompt type one of the following
commands. Use the exit or end command to return to the Privileged Exec mode.
Table 4-2 Configuration Modes
Mode Command Prompt Page
Line line {console | vty} Console(config-line)# 4-10
Access
Control List
4-86
access-list ip standard
access-list ip extended
access-list mac
Console(config-std-acl)#
Console(config-ext-acl)#
Console(config-mac-acl)#
Interface interface {ethernet port | port-channel id| vlan id} Console(config-if)# 4-105
VLAN vlan database Console(config-vlan)# 4-146
For example, you can use the following commands to enter interface configuration
mode, and then return to Privileged Exec mode
Console(config)#interface ethernet 1/5
.
Console(config-if)#exit
Console(config)#
4-7