8.28 MB - Edge-Core

Basic Configuration
3
CLI – Specify the hostname, location and contact information.
Console(config)#hostname R&D 5 4-24
Console(config)#snmp-server location WC 9 4-101
Console(config)#snmp-server contact Ted 4-101
Console(config)#exit
Console#show system 4-60
System description: 24FE Standalone Intelligent Switch
System OID string: 1.3.6.1.4.1.259.6.10.50
System information
System Up time:
0 days, 2 hours, 4 minutes, and 7.13 seconds
System Name: R&D 5
System Location: WC 9
System Contact
Ted
MAC address
00-30-F1-12-34-56
Web server:
enabled
Web server port: 80
Web secure server: enabled
Web secure server port: 443
Telnet server:
enabled
Telnet port: 23
Jumbo Frame:
Disabled
POST result
DUMMY Test 1.................PASS
UART LOOP BACK Test..........PASS
DRAM Test....................PASS
Timer Test...................PASS
RTC Initialization...........PASS
Switch Int Loopback test.....PASS
Done All Pass.
Console#
Displaying Switch Hardware/Software Versions
Use the Switch Information page to display hardware/firmware version numbers for
the main board and management software, as well as the power status of the system.
Field Attributes
Main Board
• Serial Number – The serial number of the switch.
• Number of Ports – Number of built-in RJ-45 ports.
• Hardware Version – Hardware version of the main board.
• Internal Power Status – Displays the status of the internal power supply.
Management Software
• Loader Version – Version number of loader code.
• Boot-ROM Version – Version of Power-On Self-Test (POST) and boot code.
• Operation Code Version – Version number of runtime code.
• Role – Shows that this switch is operating as Master or Slave.
Expansion Slot
• Expansion Slot 1/2 – Expansion modules.
3-9