8.28 MB - Edge-Core

4
Command Line Interface
Table 4-7 System Management Commands (Continued)
Command Group Function Page
System Status Displays system configuration, active managers, and version information 4-57
Frame Size Enables support for jumbo frames 4-62
Device Designation Commands
Table 4-8 Device Designation Commands
Command Function Mode Page
prompt Customizes the prompt used in PE and NE mode GC 4-24
hostname Specifies the host name for the switch GC 4-24
snmp-server contact Sets the system contact string GC 4-101
snmp-server location Sets the system location string GC 4-101
prompt
This command customizes the CLI prompt. Use the no form to restore the default
prompt.
Syntax
prompt string
no prompt
string - Any alphanumeric string to use for the CLI prompt. (Maximum
length: 255 characters)
Default Setting
Console
Command Mode
Global Configuration
Example
Console(config)#prompt RD2
RD2(config)#
hostname
This command specifies or modifies the host name for this device. Use the no form
to restore the default host name.
Syntax
hostname name
no hostname
name - The name of this host. (Maximum length: 255 characters)
4-24