8.28 MB - Edge-Core

4
Command Line Interface
The ! command repeats commands from the Execution command history buffer
when you are in Normal Exec or Privileged Exec Mode, and commands from the
Configuration command history buffer when you are in any of the configuration
modes. In this example, the !2 command repeats the second command in the
Execution history buffer (config).
Console#!2
Console#config
Console(config)#
reload
This command restarts the system.
Note: When the system is restarted, it will always run the Power-On Self-Test. It will also
retain all configuration information stored in non-volatile memory by the copy
running-config startup-config command.
Command Mode
Privileged Exec
Command Usage
This command resets the entire system.
Example
This example shows how to reset the switch:
Console#reload
System will be restarted, continue ? y
end
This command returns to Privileged Exec mode.
Command Mode
Global Configuration, Interface Configuration, Line Configuration, and VLAN
Database Configuration.
Example
This example shows how to return to the Privileged Exec mode from the Interface
Configuration mode:
Console(config-if)#end
Console#
exit
This command returns to the previous configuration mode or exit the configuration
program.
Command Mode
Any
4-22