8.28 MB - Edge-Core

4
Command Line Interface
spanning-tree protocol-migration
This command re-checks the appropriate BPDU format to send on the selected
interface.
Syntax
spanning-tree protocol-migration interface
interface
• ethernet unit/port
- unit - This is unit 1.
- port - Port number. (Range: 1-26)
• port-channel channel-id (Range: 1-4)
Command Mode
Privileged Exec
Command Usage
If at any time the switch detects STP BPDUs, including Configuration or
Topology Change Notification BPDUs, it will automatically set the selected
interface to forced STP-compatible mode. However, you can also use the
spanning-tree protocol-migration command at any time to manually
re-check the appropriate BPDU format to send on the selected interfaces (i.e.,
RSTP or STP-compatible).
Example
Console#spanning-tree protocol-migration ethernet 1/5
Console#
show spanning-tree
This command shows the configuration for the spanning tree.
Syntax
show spanning-tree [interface]
• interface
• ethernet unit/port
- unit - This is unit 1.
- port - Port number. (Range: 1-26)
• port-channel channel-id (Range: 1-4)
Default Setting
None
Command Mode
Privileged Exec
4-144