Connection schemes Sepam 1000+ series 40 - Trinet

Characteristics
Environmental characteristics
Isolation
Dielectric withstand at power frequency CEI 60255-5 2 kVrms - 1mn (1)
1.2 / 50 µs impulse wave CEI 60255-5 5 kV (2)
Electromagnetic compatibility
Fast transient bursts CEI 60255-22-4 class IV
CEI 61000-4-4
level IV
1 MHz damped oscillating wave CEI 60255-22-1 class III
Immunity to radiated fields CEI 61000-4-3 level III 10 V/m
Immunity to conducted RF disturbances CEI 61000-4-6 level III 10 V
Electrostatic discharge CEI 60255-22-2 class III 6 kV / 8 kV (contact / air)
CEI 61000-4-2 level III
Conducted disturbance emission EN 55022 / CISPR 22 class B on aux. supply (3)
Disturbing field emission EN 55022 / CISPR 22 class A
(4)
Mechanical robustness
Degree of protection CEI 60529 IP 52 (7) on front panel
other sides closed
(except for rear IP 20)
Vibrations CEI 60255-21-1 class II (5)
Shocks / jolts CEI 60255-21-2 class II (5)
Earthquakes CEI 60255-21-3 class II (5)
Fire resistance CEI 60695-2-1 glow wire 650 °C
Climatic withstand
Operation CEI 60068-2-1 et 2 -25 °C à + 70 °C
Storage CEI 60068-2-1 et 2 -25 °C à +70 °C
Damp heat CEI 60068-2-3 93 % HR à 40 °C,
56 days (storage)
10 days (operation)
Effect of corrosion CEI-68054-4 class I
Certification
CE
UL508 (6)
(1) except for communication 1 kVrms.
(2) except for communication 3 kV common mode, 1 kV differential mode.
(3) generic EN 50081-1 standard.
(4) generic EN 50081-2 standard.
(5) intrinsic withstand of product, excluding support equipment.
(6) series 40: please consult us.
(7) a gasket delivered with the product can be used to ensure NEMA12 withstand.
Schneider Electric
35