McAfee Email Gateway version 7.0 Appliances Installation Guide

More documents

Recommendations

Info

2Installing the McAfee Email Gateway applianceUsing the Configuration ConsoleDraft only - 9.13.11OptionNTP ServerNew ServerDefinitionDisplays the network address or a domain name of one or more NTP servers that theappliance uses. For example, time.nist.gov.If you specify several servers, the appliance examines each NTP message in turn todetermine the correct time.Type the IP address of a new NTP Server.Password pageUse this page to specify a password for the appliance.For a strong password, include letters and numbers. You can type up to 15 characters.OptionUser IDPasswordDefinitionThis is admin. You can add more users later.Specifies the new password. Change the password as soon as possible to keep yourappliance secure.You must enter the new password twice to confirm it. The original default password ispassword.Summary pageUse this page to review a summary of the settings that you have made for the network connectionsand scanning of the email traffic.To change any value, click its blue link to display the page where you originally typed the value.After you click Finish, the Setup Wizard has completed.Use the IP address shown here to access the interface. For example https://192.168.200.10.The address begins with https, not http.When you first log on to the interface, type the user name, admin and the password that you gave onthe Password page.Option DefinitionThe value is set according to best practice.The value is probably not correct. Although the value is valid, it is not set according to bestpractice. Check the value before continuing.No value has been set. The value has not been changed from the default. Check the valuebefore continuing.Restoring from a fileUse this information to understand the purpose of restoring from a fileWhen configuring your device from the Setup Wizard within the user interface, using the Restore from a fileoption enables you to import previously saved configuration information and apply it to your device.After this information has been imported you can make changes before applying the configuration.The Restore from a file option is not available from within the Configuration Console. To make use of this option,you must log into the McAfee Email Gateway and select Restore from a file from the System | Setup Wizard menu.36 McAfee ® Email Gateway 7.0 Appliances Installation Guide
Draft only - 9.13.11Installing the McAfee Email Gateway applianceUsing the Configuration Console 2Once the configuration information has been imported, you are taken to the Custom Setup options withinthe Setup Wizard (see Performing a custom setup.) All imported options are shown on the wizard pages,giving you the opportunity to make any amendments before applying the configuration.When using the Restore from a file option, the wizard includes these pages:• Import Config• Values to RestoreOnce this information has been loaded, you are then taken to the Custom Setup pages, so that you canmake further changes before applying the new configuration:• Email Configuration • DNS and Routing• Basic Settings • Time Settings• Network Settings • Password• Cluster Management • SummaryBasic Settings page (Custom Setup)Use this page when selecting the Custom Setup wizard, to specify basic settings for the appliance.The appliance tries to provide some information for you, and shows the information highlighted inamber. To change the information, click and retype.OptionCluster modeDefinitionDefines the options that appear on the Cluster Management page of the Setup Wizard.• Off — This is a standard appliance.Device nameDomain nameDefault GatewayNext Hop RouterNetwork Interface• Cluster Scanner — The appliance receives its scanning workload from a master appliance.• Cluster Master — The appliance controls the scanning workload for several otherappliances.• Cluster Failover — If the master fails, this appliance controls the scanning workloadinstead.Specifies a name, such as appliance1.Specifies a name, such as domain1.com.Specifies an IPv4 address, such as 198.168.10.1. You can test later that the appliancecan communicate with this server.Specifies an IPv6 address, such as FD4A:A1B2:C3D4::1.Becomes available when you set the Next Hop Router for IPv6.Cluster Management pageUse this page to specify cluster management balancing requirements.Depending on the cluster mode you selected on the Basic Settings page, the options that appear on theCluster Management page change.Cluster Management Configuration (Standard appliance)Do not use. Cluster management is disabled.McAfee ® Email Gateway 7.0 Appliances Installation Guide 37
Page 1: Draft only - 9.13.11Installation Gu
Page 5 and 6: Draft only - 9.13.11PrefaceContents
Page 7 and 8: Draft only - 9.13.11PrefaceFinding
Page 9 and 10: Draft only - 9.13.111Preparing1to i
Page 11 and 12: Draft only - 9.13.11Preparing to in
Page 17 and 18: Draft only - 9.13.112Installingthe
Page 19 and 20: Draft only - 9.13.11Installing the
Page 35: Draft only - 9.13.11Installing the
Page 53 and 54: Draft only - 9.13.113Atour of the D
Page 55 and 56: Draft only - 9.13.11A tour of the D
Page 57 and 58: Draft only - 9.13.1144Testingthe co
Page 59 and 60: Draft only - 9.13.115Exploring5the
Page 61 and 62: Draft only - 9.13.11Exploring the a
Page 67 and 68: Draft only - 9.13.11IndexAabout thi
Page 69: 700-3349A0000Draft only - 9.13.11

McAfee Email Gateway version 7.0 Appliances Installation Guide

Create successful ePaper yourself

Delete template?

Save as template?