09.07.2015 Views

McAfee Email Gateway version 7.0 Appliances Installation Guide

McAfee Email Gateway version 7.0 Appliances Installation Guide

McAfee Email Gateway version 7.0 Appliances Installation Guide

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

2Installing the <strong>McAfee</strong> <strong>Email</strong> <strong>Gateway</strong> applianceUsing the Configuration ConsoleDraft only - 9.13.11Basic Settings page (Encryption Only Setup)Use this page when selecting the Encryption Only Setup Wizard, to specify basic settings for theappliance.The appliance tries to provide some information for you, and shows the information highlighted inamber. To change the information, click and retype.OptionCluster modeDevice nameDomain nameDefault <strong>Gateway</strong>Next Hop RouterNetwork InterfaceSelect management portDefinitionDefines the options that appear on the Cluster Management page of the Setup Wizard.• Off — This is a standard appliance.• Cluster Scanner — The appliance receives its scanning workload from a masterappliance.• Cluster Master — The appliance controls the scanning workload for several otherappliances.• Cluster Failover — If the master fails, this appliance controls the scanningworkload instead.Specifies a name, such as appliance1.Specifies a name, such as domain1.com.Specifies an IPv4 address, such as 198.168.10.1. You can test later that theappliance can communicate with this server.Specifies an IPv6 address, such as FD4A:A1B2:C3D4::1.Becomes available when you set the Next Hop Router for IPv6.Specifies the port that manages the gateway. By default, <strong>McAfee</strong> <strong>Email</strong> <strong>Gateway</strong>uses port 10443.Network Settings page (Encryption Only Setup)Use these options to view and configure the IP address and network speeds for <strong>McAfee</strong> <strong>Email</strong> <strong>Gateway</strong>as an encryption only appliance. You can use IPv4 and IPv6 addresses, separately or in combination.To prevent duplication of IP addresses on your network and to deter hackers, give the appliance newIP addresses, and disable the default IP addresses. The IP addresses must be unique and suitable foryour network. Specify as many IP addresses as you need.Table 2-13 Option definitionsOptionNetwork Interface 1Network Interface 2Change Network SettingsView Network InterfaceLayoutDefinitionThe operating mode that you set during installation or in the Setup Wizard.Expands to show the IP address and netmask associated with Network Interface1, the auto-negotiation state, and the size of the MTU.Expands to show the IP address and netmask associated with Network Interface2, the auto-negotiation state, and the size of the MTU.Click to open the Network Interface Wizard to specify the IP address andadapter settings for NIC 1 and NIC 2, and change the chosen operating mode.Click to see the associated with LAN1, LAN2, and the out of band interface.Cluster Management page (Encryption Only Setup)Use cluster management to specify load balancing requirements.Depending on the cluster mode you selected on the Basic Settings page, the options that appear onthe Cluster Management page change.48 <strong>McAfee</strong> ® <strong>Email</strong> <strong>Gateway</strong> <strong>7.0</strong> <strong>Appliances</strong> <strong>Installation</strong> <strong>Guide</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!