10.07.2015 Views

desa international unvented (vent-free) propane gas log heater

desa international unvented (vent-free) propane gas log heater

desa international unvented (vent-free) propane gas log heater

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

CLEANINGANDMAINTENANCEWARNING ICON G 001WARNINGTurn off <strong>heater</strong> and let cool before cleaning.WARNING ICON G 001CAUTIONYou must keep control areas, burners, and circulating air passagewaysof <strong>heater</strong> clean. Inspect these areas of <strong>heater</strong> before eachuse. Have <strong>heater</strong> inspected yearly by a qualified service person.Heater may need more frequent cleaning due to excessive lint fromcarpeting, bedding material, etc.ODS/PILOT AND BURNERS• Use a vacuum cleaner or small, soft bristled brush to clean.LOGS• If you remove <strong>log</strong>s for cleaning, refer to Installing Logs, page 19, to properlyreplace <strong>log</strong>s.• Replace <strong>log</strong>(s) if broken or chipped (dime-sized or larger).TROUBLE-SHOOTINGNote: All troubleshootingitems are listed in order ofoperation.WARNING ICON G 001WARNINGTurn off and unplug <strong>heater</strong> and let cool before servicing. Only aqualified service person should service and repair <strong>heater</strong>.WARNING ICON G 001CAUTIONNever use a wire, needle, or similar object to clean ODS/pilot. Thiscan damage ODS/pilot unit.101309OBSERVEDPROBLEMWhen ignitor buttonis pressed, there is nospark at ODS/pilotPOSSIBLECAUSE1. Ignitor electrode notconnected to ignitor cable2. Ignitor cable pinched orwet3. Piezo ignitor nut is loose4. Broken ignitor cable5. Bad piezo ignitor6. Ignitor electrode positionedwrong7. Ignitor electrode brokenREMEDY1. Reconnect ignitor cable2. Free ignitor cable ifpinched by any metal ortubing. Keep ignitorcable dry3. Tighten nut holdingpiezo ignitor to basepanel of <strong>log</strong> set. Nut islocated behind basepanel.4. Replace ignitor cable5. Replace piezo ignitor6. Replace ignitor7. Replace ignitorContinued25

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!