SENSORS

POSITION / SPEEDIndustrial Magnetic Rotary EncoderIndustrial Magnetic Rotary Encoders are contactless magnetic rotary encoders, which integrate Hall elements, analog frontend and digital signal processing in a single device, for accurate angular measurement over a full turn of 360°.amsPartNumberMaximumRotationalAngleOutputType*Magnetic FieldRange (mT)OutputResolution(deg)RPM(Max)Hysteresis(Degree)SupplyVoltagenom. (V)SupplyCurrentmax. (mA)OperatingTemp. (°C)PackageAS5030 360 SSI, PWM 20 to 80 1,4 (8bit) 30K 1.4 5.0 22 -40 to 125 TSSOP16AS5035 360 ABI 45 to 75 1,4 (8bit) 30K 0.7 3.3 or 5.0 25 -40 to 125 SSOP16AS5040 360AS5043 360SSI,PWM,ABI, UVWSSI,Analog45 to 75 0.35 (10bit) 30K 0.7 3.3 or 5.0 21 -40 to 125 SSOP1645 to 75 0.35 (10bit)depends onapplication0.7 3.3 or 5.0 21 -40 to 125 SSOP16AS5045 360 SSI, PWM 45 to 75 0.09 (12bit) 30K 0.7 3.3 or 5.0 21 -40 to 125 SSOP16AS5048A 360 SPI, PWM 30 to 70 0.022 (14bit) N/A 0 3.3 or 5.0 15 -40 to 150 TSSOP14AS5048B 360 I²C, PWM 30 to 70 0.022 (14bit) N/A 0 3.3 or 5.0 15 -40 to 150 TSSOP14AS5050 360 SPI 30 to 80 0.35 (10bit) N/A 0 3.3 8.5 -40 to 85AS5055 360 SPI 30 to 80 0.09 (12bit) N/A 0 3.3 8.5 -40 to 85QFN-16(4x4x0.85mm)QFN-16(4x4x0.85mm)MeasurmentSpecialtiesKMA36 360Analog,I 2 C540 0.04 N/A +/- 0.1 5.5 Max 30 -25 to 80 TSSOP20Industrial Magnetic Linear EncoderThe Industrial Magnetic Linear Encoders are single-chip ICs with integrated Hall elements for high speed linear motion and offaxis rotation measurement.amsPartNumberOutputType*Magnetic FieldRange (mT)LinearResolutionSpeed(Max)Hysteresis(lsb)Supply Voltagenom. (V)Supply Currentmax. (mA)OperatingTemp. (°C)PackageAS5304 ABI 5 to 60 25 (um) 20 meter/sec 1.5 5.0 35 -40 to 125 TSSOP20AS5306 ABI 5 to 60 15 (um) 12 meter/sec 1.5 5.0 30 -40 to 125 TSSOP20AS5311SSI, PWM,ABI10 to 40 0,488 (um) 0.65 meter / sec 2 3.3 or 5.0 21 -40 to 125 TSSOP-20AS5510 I²C 10 to 50 10 bit N/A 0 3.0 3.5 -30 to 85 WLCSPNSE-5310 I²C, PWM 10 to 40 0,488 (um) 0.65 meter / sec 2 3.3 or 5.0 21 -40 to 125 TSSOP-20POSITION / SPEEDMagnetic Rotational Speed SensorThe rotational speed sensors detect rotational speed or direction of ferrous gear wheels / geartooth target and referencemarks.NXPSensorTypeTyp. SensingDistance (mm)ToothFrequency (Hz)TargetOutput TypeSupply Voltage(V)TemperatureRange (°C)PackageKMI15/1 0 - 2.9 0 - 25,000 ferrous target Current 12 (typical) -40 to 85 SOT453KMI15/2depending onencoder0 - 25,000 magnetized target Current 12 (typical) -40 to 85 SOT453KMI15/4 0 - 2.3 0 - 25,000 ferrous target Current 12 (typical) -40 to 85 SOT453KMI16/1 0 - 2.9 0 - 25,000 ferrous target Open collector 5 (typical) -40 to 150 SOT47763*note: SSI: Synchronized Serial Interface, ABI: A/B Quadrature, UVW: BLDC Commutationwww.FutureElectronics.com/Sensors