Chainflex cables

USBTPE12,5 x dTPE Bus cableChainflex ® USB● USB cable 2.0● for maximum load requirements● TPE outer jacket● oil-resistant● flame-retardantEspecially bendingresistantfine-wirestranded conductorTemperature rangemovedTemperature rangefixedv max.unsupported/gliding-35 °C to +70 °C, minimum bending radius 12,5 x d-40 °C to +70 °C, minimum bending radius 5 x d10 m/s, 6 m/sa max. 100 m/s 2Cores and pairesstranded with anespecially shortpitch lengthUV-resistantNominal voltageMedium30 VTesting voltage500 VExtremely bendingresistant.tinnedcopper shieldOilFlame-retardantSilicon-freeConductorCore insulationOil-resistant (following DIN EN 60811-2-1), bio-oil-resistant(following VDMA 24568 with Plantocut 8 S-MB tested by DEA).According to IEC 60332-1-2, CEI 20-34, FT1, VW-1Free from silicon which can affect paint adhesion (followingPV 3.10.7 – status 1992).Fine-wire stranded conductor in especially bending-resistantversion consisting of bare copper wires (following EN 60228).Mechanically high-quality PE mixture.Core strandingCores and paires stranded with an especially short pitch lengthPressure extruded.flame-retard TPEblendUSBCore identification Core 0,5 mm 2 : red, blackCore 0,08 mm 2 : white, green (CFBUS.065).Core 0,24 mm 2 : white. green (CFBUS.066).Overall shield Extremely bending-resistant, tinned braided copper shield.Coverage approx. 70% linear, approx. 90% optical.Outer jacketLow-adhesion mixture on the basis of TPE, especially abrasionresistantand highly flexible, adapted to suit the requirements inEnergy Chains ® . Colour: Red lilac (similar to RAL 4001)UL/CSA Style 1589 and 21371, 30 V, 80 °CDESINAAccording to VDW, DESINA standardisationCEFollowing 2006/95/EC238Image exemplary.... no minimum order quantity