Acoustica MP3 CD Burner 4. 0 Help

CD Burning ProblemsIt won't finish the burn or test! You end up with an unusable CD!The burn fails right after it has started burning the first track (Try turning off ‘Autoinsert notification)!I've tried everything. What else can I do to get it to burn successfully?It fails right after the burn/test starts!It won’t finish the burn or test! You end up with an unusable CD! What’shappening and what can you do about it?It is crucial to not use any software when burning or test-burning an audio CD. TheCD recorder must have a non-interruptible stream of audio data. If it is interruptedthe burn will fail.Here’s what you can do to avoid a failed burn or test-burn.• Try test burns before doing actual burns!• Enable "Burn-Proof" in the Preferences (CD/DVD Recorder) if available!(This is enabled by default.)• Lower your burn speed. Your computer may not be able to keep up withthe demands of your CD recorder. For example, if you are burning at 8X,reduce it to 4X. Disable virus checkers and screen savers.• Select the "Convert to wav files first" option on the Burn window.• Do not use any other programs during a burn.• Do not use your computer during a burn.• Make sure that your computer is well ventilated. CD Recorders canoverheat.Burn Fails - How to turn off ‘Auto insert notification’You may need to disable something called "Auto Insert Notification" (AIN) for yourCD recorder. The problem is that when the table of contents is being recorded,Window’s suddenly "sees" the new CD and tries to read it, which can cause theburn to fail.To disable Auto Insert Notification, click the Preferences menu item from the Filemenu. Uncheck the "Auto Insert Notification" item and click OK. You will have toreboot.