Biological Microscope BMS C1 series User Manual - BMS and ...

More documents

Recommendations

Info

6.Trouble ShootingBMS C1I. Optical Part:PROBLEMS REASON FOR PROBLEMS SOLUTION1. The edge of thefield of view hasshadow or thebrightness isasymmetry2. Stains in ViewField3. Low imagequality (Lowresolution, lowcontrast)The nosepiece is not in thelocated positionAdjust it into the locatedpositionThe filament Imaging not in Adjusting it to centercenterStains on the lens (Condenser, Wipe upObjective, Eyepiece)Stains on the lens (Condenser, Wipe upObjective, Eyepiece)Stains on the specimenWipe upLoose the condenser lockingThe Condenser position is too bolt. Adjust the position oflow.condenser. Screw down the lockingbolt.No cover slip on the specimen Cover the slipUse standard coverThe cover slip is too thick or too thin.slip.Thickness:0.17mmThe specimen is reversedReverse back.The dry objective is stained Wipe upwith oil (Especially 40X)Stains on the lens (Condenser, Wipe upObjective, Eyepiece)The oil objective is not in oil. Use oilThere is air bubble in oil Remove oilNot use the appointed oil Use the appointed oilThe opening of Aperture Properly make it smallerdiaphragm is too largeStains on the incidence lens in Wipe upthe binocular drawtube.The opening of Aperture Properly make it largerdiaphragm is too smallCondenser position is too low Adjust the position4. One side ofimage is dark.The condenser is not in center of theview field, or the condenser isinclined.The nosepiece is not in the locatedpositionThe specimen is floating on thestage.Reinstall the condenser and adjustthe center carefully by using thecondenser adjusting bolt.Turn it into the requiredpositionReinforce it reliably.
5. The image movedwhen focusing.6. The image takesthe yellowslightly.7. The brightdegree is notenoughThe specimen is floating on thestage.The nosepiece is not in the locatedpositionNot use the color filter.The opening of Aperturediaphragm is too smallCondenser position is too lowStains on the lens (Condenser,Objective, Eyepiece)Reinforce it reliably.Turn it into the requiredpositionUse the blue filter.Properly make it largerAdjust the positionWipe up14
Page 1: Biological MicroscopeBMS C1 seriesU
Page 7 and 8: BMS C12. Installing Setps2.2.1 Inst
Page 9 and 10: BMS C12.2.5 Link cable wire (pictur
Page 11 and 12: 3. adjustment &operation BMS C13.1
Page 13 and 14: BMS C13.2 Operation3.2.1 Adjusting
Page 15 and 16: BMS C13.3.3 Adjusting the Diopter(F
Page 17: 5.Configuration tableBMS C1Name ofC

Biological Microscope BMS C1 series User Manual - BMS and ...

Create successful ePaper yourself

Delete template?

Save as template?