Mimaki Guide 2011.pdf - HOME

InKJEt PrIntEr UV cURAbLEInKJEt PrIntEr UV cURAbLESpecifications(complete list in brochure and operation manual)Introduction year 2008Print headOn-demand piezo-electric headMaximum print widthRoll: 161 cm, rigid: 160 cmPrinting resolutions600, 1200 dpiMedia sizeMax. 162 cmMedia thicknessMax. 1 cmInksInkLF-200flexible UV inkLH-100hard UV inkcolours cMYK W cMYK W cLQuantity 600 cc 600 ccProduct code SPc-0591X SPc-0597X*Switching inks cannot be done without thesupport of a technician. It is possible to replaceink cartridges while printing.ProoFInG, MocKuPS & SAMPLInG SoLutIonS• uJF-706• uJF-3042Media weightMedia take-up deviceMedia cuttingMedia heaterUV deviceRoll: up to 25 kg, rigid: up to 12 kgRoll take-up device (standard),Inside / outside selectablecut manuallyInterface USb 2.0Power consumptionPre/print heaterUV LED (10,000 lifetime (*1) hours)Less than 1.68 kVADimensions (W x D x H)330 cm x 78 cm x 129 cm+ media tables 330 cm x 430 cm x 129 cmWeightMedia table260 kg50 kg x 2 units(1) Reference value. There is no guarantee as to the lifetime.Included• Media tables• RasterlinkPro RIP software• One-year warrantySupplies• Cleaning solution | 400 cc(for LF-200 and LH-100)Vehicle wrappingPencil holder andbrochure standSPc-0606FSPrIntABLE SuBStrAtESThe UJF Series can be used for a wide range ofsubstrates, such as• SOFT PACKAGING • METALFILM & SHRINK FOIL • ALUMINIUM• PLA • TIN• PET • (UN)COATED PAPERS• POLYCARBONATESAttention should be paid to ink adhesion, as whilst itwill print onto almost any substrate, levels of adhesiondo differ between materials. For more informationread the theme pages about “How to improve UV inkadhesion.”APPLIcAtIonS• PACKAGING PROOFS• SAMPLES AND MOCKUPSMimaki offers entry level and high end uV inkjet printing solutions for contract proofing,mockups, package prototypes and short run production. the solution offers greatbenefits for a wide range of print companies and package design agencies operating inthe packaging industry, such as gravure, flexo, offset and digital print companies andlarge packaging design and marketing agencies.Proofing or mockups/prototypesFlexible or rigid mediaGenerally speaking the UJF-3042 isboth UJF-706 and UJF-3042 can printsuitable for early stage high qualitydirectly on rigid media, such as metal, tin,prototypes and marketing samples with acrylics, glass, styrene, PET, polycarbonateor without special colour management and more. With the roll option on UJF-706software and the UJF-706 is developed print companies can also print on thinfor final stage contract proofing. Inpackaging film (min 25 micron) with thecombination with advanced colourhighest precision in the market.POP displaymanagement software from GMG.Specifications are subject to change without prior notice. compositors errors reserved.