Mimaki Guide 2011.pdf - HOME

cuttInG PLOTTERSM head (router)r1 head (reciprocating cutter)tF2 head (tangential cutter)Specifications(complete list in brochure and operation manual)Introduction year 2008Effective cutting areaDriving methodMaximum cutting speedAccuracy of repeatabilitycF3-1610 : 100 x 160 cmcF3-1631 : 310 x 160 cmX, Y, Z, Ø axes Dc servo50 cm/sPlus minus 0.15 mmMaximum cutting depth Router 5 cmTangential cutter 1 cmReciprocal cutter 2 cmMedia fixationInterfacePower consumptionDimensions (W x D x H)Flatbed with vacuum systemcF3-1610 : 2 partitionscF3-1631 : 6 partitionsUSb, RS-232cLess than 1200 VA, 6000 VA (blower)cF3-1610 : 338 x 200 x 135 cmcF3-1631 : 338 x 423 x 135 cmIncluded• Finecut plug-in software for Adobe Illustratorand corelDRAW• Mimaki Plotter Assistant• 1 vacuum / blower unit for cF3-1610 (of total 2)• 2 vacuum / blower units for cF3-1631 (of total 3)• Two-year warrantyoptional• Vacuum / blower OPT-c0212• R1 head unit (tangential) OPT-c0211• TF2 head unit (tangential) OPT-c0210• M head unit (router) OPT-c0209• Felt mat SPc-0518• Spindle motor SPA-0149• cutting mat 1631A SPc-0521• cutting mat 1631b SPc-0522• cutting mat 1610 SPc-0523• Felt mat holder A SPc-0519• Felt mat holder b SPc-0520• End-millSPb-0067, SPb-0068, SPb-0069, SPb-0070, SPb-0071other devices needed• Industrial vacuum cleaner (table cleaning)• compressor (blowing away routing dust)InKS & SoFtWArESpecifications are subject to change without prior notice. compositors errors reserved.