01 Z3 COIL - Enduro Fork Seals

More documents

Recommendations

Info

FIG. 4Remove foot nuts (26) and (29) with asocket wrench.FIG. 5Withdraw the crown and stanchions assembly(1) from the sliders.FIG. 6Remove the dust seal (19) from the top ofthe sliders using a small screwdriver.<strong>Z3</strong> CoilDx.191Sx.2926
FIG. 7Remove the stop ring (20) from the slidersby placing the screwdriver bit in one of thethree openings on the stop ring.IMPORTANT: when removing the stopring, make sure not to damage its seat.FIG. 8Fit the slider protector (A) onto the sliderand remove the oil seal (21) with the helpof a large screwdriver.IMPORTANT: when removing the oilseal, make sure not to damage its seat.Once removed the oil seals should not beused again.FIG. 9Remove the upper washer (22) from theslider.<strong>Z3</strong> Coil2021A22
Page 2 and 3: Z3 Coil(100)17580Ø30 +0.050L.MAX=4
Page 4 and 5: INSTRUCTIONSZ3 CoilGENERAL RULES1.
Page 6 and 7: Z3 CoilRECOMMENDATIONS FORMAINTENAN
Page 8 and 9: DISASSEMBLYGENERAL- The reference n
Page 12 and 13: FIG. 10Fit the bit of a small screw
Page 14 and 15: Z3 CoilREASSEMBLYCAUTION: before re
Page 16 and 17: VALVE AND PUMPING RODASSEMBLYFIG. 2
Page 18 and 19: HOW TO FILL WITH OILFIG. 27Pour oil

01 Z3 COIL - Enduro Fork Seals

Create successful ePaper yourself

Delete template?

Save as template?