01 Z3 COIL - Enduro Fork Seals

Z3 CoilREASSEMBLYCAUTION: before reassembling, all metalcomponents should be washed carefullywith inflammable, preferably biodegradable,solvent and dried with compressedair.PILOT BUSHING AND SEALASSEMBLYFIG. 15Check that no dirt or debris is betweenslider and bushing. Insert the pilot bushing(23) into place so that it adheres to theslider.FIG. 16Fit the upper washer (22) into the slider sothat it touches the pilot bushing.FIG. 17Lubricate the oil seal (21) and place itonto the seal press (B) with the hollowside toward the slider.Press the oil seal until it touches the lowerwasher by using the above seal press.2322B21