wecs-ltd.co.uk Oerlikon Welding Consumable Product Guide 06.pdf

TIG Wires - C-Mn &Low Alloy SteelsTIG WIRES - Stainless SteelsCURRENTPRODUCTLINESAWSENFUTUREPRODUCTLINEDESCRIPTIONCURRENTPRODUCTLINESAWSENFUTUREPRODUCTLINEDESCRIPTIONCarborodA18ER70S-6G3Si-1 Carborod 1For welding mild steel & medium carbon steelsrequiring weld metal impact toughness propertiesdown to -20°CCarborod308LER308LW 19 9 LInertrod308LFor the welding of 18%Cr-8%Mo ( 304 & 304L )stainless steels.-ER70S-6G4Si-1Carborod 1ADouble deoxidised wire with increased levels ofmanganese and silicon providing excellent mechanicalproperties.Carborod309LER309LW 23 12 LInertrod309LA nominal 25%Cr -12%Ni wire. for the welding ofstainless steel to mild and medium carbon steels.CarborodSD3ER70S-G-CarborodSD3Provides a nominal 1.7%Mn weld metal for weldingfine grained structural steels requiring impacttoughness properties down to -60°CCarborod316LER 316LW 19 12 3 LInertrod316LA nominal 18%Cr-12%Ni-3%Mo wire for the weldingof 316 & 316L grade stainless steels.CarborodMoER80S-G-CarborodMoFor the welding of 0.5%Mo low alloy creep resistingsteels used in chemical plant construction operating attemperatures up to 500°CCarborod309LMoER 309LMoW 23 12 2 LInertrod309LMoA nominal 25%Cr-12%Ni-3%Mo wire for thedeposition of cladding layers on mild and mediumtensile steels prior to depositing 316L final layers.CarborodCr Mo 1ER80S-GWCrMo 1 SiCarborodCr Mo 1A nominal 1.25%Cr-0.5%Mo wire for the welding oflow alloy creep resisting steels for servicetemperatures up to 500°CCarborod310ER 310W 25 20 Inertrod 310A nominal 25%Cr-20%Ni wire for welding of AISI 310grade austenitic stainless steels working at hightemperatures.CarborodCr Mo 2ER90S-GWCrMo 2 SiCarborodCr Mo 2A nominal 2.25%Cr-1%Mo wire for the welding of lowalloy creep resisting steels of similar analysis and0.5%Cr-0.5%Mo-0.25%V steels operating attemperatures up to 565°CCarborod312ER 312W 29 9Inertrod 312A 29%Cr-9%Ni type wire used for the welding ofhigher carbon steels and dissimilar steel combinationswhere high levels of strength are requiredCarborod9 Cr MoER80S-B8-Carborod9 Cr MoA nominal 9%Cr-1%Mo wire for welding Cr-Mo steelsof similar composition working at elevatedtemperatures up to 600°CCarborod347ER 19 9 NbW 19 9 NbInertrod 347A nominal 19%Cr-9%Ni-0.6Nb stabilised wire for thewelding of AISI 321 and 347 grades and ENequivalent steelsCarborod9 Cr modER90S-B9-Carborod9 Cr modModified 9%Cr-1%Mo wire for the welding of Cr-Mosteels of similar composition with N, V and Nbadditions. Typical steel grades include P91 and T91Carborod22.8.3L-W 22 9 3 N LInertrod2209For the welding of duplex stainless steels with aPREN >35 requirement. Typical grades includeSAF2205, Hyresist 25/5Carborod1NiER80S-Ni1-Carborod1NiA nominal 1%Ni wire for welding micro-alloyed steelsrequiring impact toughness properties down to -40°C.The wire contains less than 1% nickel and conformsto NACE requirementsCarborod25.10.4L-W 25 9 4 N LInertrod2410Welding of Super Duplex stainless steels with aPREN value of>40. Requirement for the welding ofUNS32760 and Zeron 100 grades.Carborod2NiER80S-Ni2-Carborod2NiA nominal 2%Ni wire for the welding of fine grainedmicro-alloyed steels requiring impact toughnessproperties down to -50°CCarborod410ER 410- Inertrod 410A nominal 12%Cr wire for the welding of martensiticstainless steels such as AISI 403 and 410 grades.CarborodSD2 3NiER80S-G-CarborodSD2 3NiA nominal 2.5%Ni wire for welding fine grained steelsrequiring impact toughness properties down to -80°CCarborodSD3 1Ni 1 /2MoER90S-G-CarborodSD3 1Ni 1 /2MoDeposits a nominal 1.5%Mn-0.9%Ni-0.5%Mo weldmetal providing high strength and impact toughnessproperties down to -60°C.WeatherodER80S-GW Mn3Ni1Cu WeatherodFor the welding of low alloy steels commonly knownas ‘weathering’ steels. Typical grades includeCor-Ten A & B, Patinax 37 etc.2122