Summit - Denver Instrument

Leveling the BalancePurpose:– To compensate for unevenness at the placeof installationAlways level the balance again any time afterit has been moved to a different location.Only the 2 front feet are adjusted to level thebalance.§ Retract the two rear feet (only on modelswith a rectangular weighing pan).§ Turn the 2 front feet as shown in the diagramuntil the air bubble is centered withinthe circle of the level indicator.> In most cases this will require severaladjustment steps.§ On models with a rectangular weighing pan:Lower the 2 rear feet until they touch thesurface on which the balance rests.Anti-theft Locking Device§ To secure the balance at the place of installation,fasten a chain or a lock to the luglocated on the rear panel of the balance.11